Related papers: Quantification of surface displacements and electr…
A spreadsheet algorithm is given for the atomic force microscope that accounts for non-linear behavior in the deflection of the cantilever and in the photo-diode response. In addition, the data analysis algorithm takes into account…
Background forces are linear long-range interactions of the cantilever body with its surroundings that must be compensated for in order to reveal tip-surface force, the quantity of interest for determining material properties in atomic…
Atomic force microscopy (AFM) is one of the most promising methods for investigating the structure of materials at the micro and nanoscale levels, as well as their local physical-mechanical properties. The experimental data obtained with…
The analysis of the electronic surface properties of transition metal oxides being key materials for future nanoelectronics requires a direct characterization of the conductivity with highest spatial resolution. Using local conductivity…
Atomic force microscopy (AFM) is an analytical surface characterization tool which can reveal a sample's topography with high spatial resolution while simultaneously probing tip-sample interactions. Local measurement of chemical properties…
We demonstrate the application of Atomic Force Microscopy (AFM) based optical force microscopy to map the optical near-fields with nanometer resolution, limited only by the AFM probe geometry. We map the electric field distributions of…
Intercalation of two dimensional materials, particularly transition metal dichalcogenides, is a noninvasive way to modify electronic, optical and structural properties of these materials. However, research of these atomic-scale phenomena…
Atomic force microscopy (AFM) enables nanoscale characterization and has been widely applied to a broad range of systems. Over the past two decades, advances in high-speed AFM have enabled not only the imaging of static structures but also…
We demonstrate AFM imaging with a microcantilever force transducer where an integrated superconducting microwave resonant circuit detects cantilever deflection using the principles of cavity optomechanics. We discuss the detector…
The force between two interacting particles as a function of distance is one of the most fundamental curves in science. In this regard, Atomic Force Microscopy (AFM) represents the most powerful tool in nanoscience but with severe limits…
Force distance curves (FCs) are among the most direct measurements performed in atomic force microscopy (AFM), yet their information content is often reduced by filtering and quasi-static interpretation. Here, enabled by a new…
Atomic Force Microscopy (AFM) conventional static force curves and Force Feedback Microscopy (FFM) force curves acquired with the same cantilever at the solid/air and solid/liquid interfaces are here compared. The capability of the FFM to…
A method to measure the viscosity of liquids at microscales is presented. It uses a thin glass fiber fixed on the tip of the cantilever of an extremely low noise Atomic Force Microscope (AFM), which accurately measures the cantilever…
Electric Scanning Probe Microscopies are used to characterize the surface behavior of ferroelectric materials. The effects of local charge density on the chemistry and physics of ferroelectric surfaces are investigated. The kinetics and…
Magnetic force microscopy (MFM) is a well-established technique in scanning probe microscopy that allows for the imaging of magnetic samples with a spatial resolution of tens of nm and stray fields down to the mT range. The spatial…
This study presents an advanced numerical framework that integrates experimentally acquired Atomic Force Microscope (AFM) data into high-fidelity simulations for adhesive rough contact problems, bridging the gap between experimental physics…
We perform simulations and experiments on an oscillating atomic force microscope cantilever approaching a surface, where the intermodulation response of the cantilever driven with two pure harmonic tones is investigated. In the simulations,…
Dynamic-mode atomic force microscopy (AFM) in liquid remains complicated due to the strong viscous damping of the cantilever resonance. Here we show that a high-quality resonance (Q>20) can be achieved in aqueous solution by attaching a…
Atomic force microscopy (AFM or SPM) imaging is one of the best matches with machine learning (ML) analysis among microscopy techniques. The digital format of AFM images allows for direct utilization in ML algorithms without the need for…
We study a model of a magnetic resonance force microscope (MRFM) based on the cyclic adiabatic inversion technique as a high-resolution tool to detect single electron spins. We investigate the quantum dynamics of spin and cantilever in the…