Related papers: Design Study on Medium beta SC Half-Wave Resonator…
We demonstrate low loss ridge waveguides and the first ring resonators for the mid-infrared, for wavelengths ranging from 5.4 to 5.6 {\mu}m. Structures were fabricated using electron-beam lithography on the silicon-on-sapphire material…
We demonstrate the operation of superconducting coplanar microwave resonators in a very large frequency range up to 50 GHz. The resonators are fabricated from niobium thin films on sapphire substrates and optimized for these high…
Silica microresonators with an inverted-wedge shape were fabricated using conventional semiconductor fabrication methods. The measured quality factors of the resonators were greater than $10^6$ in 1550 nm band. Controllable coupling from…
This paper present high precision halfwave rectifier circuit in dual phase output mode by 0.5 micrometer CMOS technology, plus or minus 1.5 V low voltage, it has received input signal and sent output current signal, respond in high…
In this work, we investigate the frequency scaling of shear-horizontal (S.H.) surface acoustic wave (SAW) resonators based on a lithium niobate on insulator (LNOI) substrate into the centimeter bands for 6G wireless systems. Prototyped…
A single gap, 352 MHz superconducting reentrant cavity for 5-100 MeV beams has been designed and it is presently under construction. This development is being done in the framework of a 30 mA proton linac project for nuclear waste…
We present a theoretical and experimental study of superconducting ring resonators as an initial step toward their implementation in superconducting electronics and quantum technologies, with promising applications including superconducting…
Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics (cQED). Within a densely integrated device, they can protect qubits from noise and serve as quantum memory…
A development effort to improve the performance of superconducting radio-frequency half-wave resonators (SRF HWRs) is underway at the Facility for Rare Isotope Beams (FRIB), where 220 such resonators are in operation. Our goal was to…
We demonstrate a high-Q ($>5 \times 10^{6}$) swept-frequency membrane mechanical resonator achieving octave resonance tuning via an integrated heater and an unprecedented acceleration noise floor below 1 $\mu$g Hz$^{-1/2}$ for frequencies…
Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave…
We report development and measurement of a micro-fabricated compact high-temperature superconducting (HTS) metamaterial atom operating at a frequency as low as $\sim$ 53MHz. The device is a planar spiral resonator patterned out of a…
We describe a practical design of an ultra-compact on-chip superconductive micro-resonator as a potential magnetic element of metamaterial. The achieved resonator size with respect to the wavelength in our experiment is about {\lambda}/…
Neutron scattering is used to probe magnetic excitations in FeSe_{0.4}Te_{0.6} (T_c=14 K). Low energy spin fluctuations are found with a characteristic wave vector $(0.5,0.5,L)$ that corresponds to Fermi surface nesting and differs from…
A High-Q microwave (K band) MEMS resonator is presented, which empolys substrate integrated waveguide (SIW) and micromachined via-hole arrays by ICP process. Nonradiation dielectric waveguide (NRD) is formed by metal filled via-hole arrays…
The semicylindrical microresonator with relatively simple excitation with a plane wave is studied. The resonator is formed on the base of the dielectric/metal/dielectric structure, where the wave energy penetrates into resonator through a…
In this work, we demonstrate a C-band shear-horizontal surface acoustic wave (SH-SAW) resonator with high electromechanical coupling (kt2) of 22% and a quality factor (Q) of 565 based on a thin-film lithium niobate (LN) on silicon carbide…
We introduce a diagnostic -- the quantum noise fraction $\beta$ -- that determines the maximum sensitivity improvement achievable through quantum enhancement for any gravitational wave detector. Applied to the landscape of proposed…
A proposal for a 10-120 mA proton linac employing superconducting beta-graded, CERN type, four cell cavities at 352 MHz is presented. The high energy part (100 MeV-1 GeV) of the machine is split in three beta-graded sections, and transverse…
A new superconducting RF cavity test facility has been commissioned at Fermilab in conjunction with first tests of a 325 MHz, {\beta} = 0.22 superconducting single-spoke cavity dressed with a helium jacket and prototype tuner. The facility…