Related papers: Mechanical and Surface Characterization of Diamond…
The influence of technological parameters of pulsed-DC chemical vapour deposition on the deposition rate, the mechanical properties and the residual stress of diamond-like carbon (DLC) coatings deposited onto a martensitic steel substrate,…
Diamond and diamond-like carbon (DLC) coatings are widely employed for their exceptional mechanical, thermal and chemical properties, but their industrial application is often limited by weak adhesion to metallic substrates. In this work,…
Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further…
Characterization of diamond-like carbon (DLC) coatings at cryogenic temperatures (down to 77 K) is presented, covering the electrical resistivity range of practical interest to gaseous and liquid particle instrumentation: 10^-1-10^5…
Diamond-Like Carbon (DLC) films have been shown to demonstrate various tribological behaviors: in ultra-high vacuum (UHV), with either friction coefficients as low as 0.01 or less and very mild wear, or very high friction coefficients…
This study examines the tribological behavior of diamond-like carbon (DLC) coatings doped with silicon (Si), cobalt (Co), or silver (Ag) in the presence of an amine-functionalized block copolymer lubricant. Under boundary lubrication,…
Diamond Like Carbon (DLC) films were deposited on quartz substrates using Dense Plasma Focus (DPF) method. The formation of ${\rm sp^3}$ bonds as is it's content in the film strongly depends on the substrate and it seems quartz is not a…
Patterning of diamond-like carbon (DLC) and DLC:metal nanocomposites is of interest for an increasing number of applications. We demonstrate a nanoimprint lithography process based on silicon containing thermoplastic resist combined with…
The Hydrogenated Diamond Like Carbon (HDLC) thin films are deposited on Silicon substrate at room temperature using asymmetric capacitively coupled RF plasma with varying flow rates of methane. These films are undergone annealing at high…
Liquid gas was used to produce DLC films on Cu, Al and steel substrates by DC plasma technique. The absorption in IR reflectance indicates, grown films are DLC. By deconvolution of room temperature UV-visible spectra of the films grown at…
We demonstrate an environmentally friendly and scalable method to create fluorine-doped diamond-like carbon (F-DLC) coatings using plasma immersion ion implantation plasma-enhanced chemical vapor deposition (PIII-PECVD) with…
Diamond-like carbon thin films have emerged as durable, chemically stable optical coatings for many optical and optoelectronics applications due to their hardness, chemical inertness, and optical transparency. This paper presents a novel…
Diamond and diamond-like carbon (DLC) are used as coating materials for numerous applications, ranging from biomedicine to tribology. Recently, it has been shown that the hydrophilicity of the carbon films can be enhanced by silicon doping,…
A novel type of resistive plate chamber, based on diamond-like carbon (DLC) electrodes is under development for background identification in the MEG II experiment. The DLC-RPC is required to have a radiation hardness to mass irradiation…
Diamond-like carbon (DLC) films are synthesized on Si using plasma enhanced chemical vapor deposition. The role of substrate bias and nitrogen doping on the structural evolution and local elastic modulus of DLC films are systematically…
For the SwissFEL Free Electron Laser project at the Paul Scherrer Institute, a pulsed High Gradient (HG) electron gun was used to study low emittance electron sources. Different metals and surface treatments for the cathode and anode were…
Diamond-based coatings are employed in several technological applications, for their outstanding mechanical properties, biocompatibility, and chemical stability. Of significant relevance is the interface with silicon oxide, where phenomena…
The present generation of Micro-Pattern Gaseous Detectors (MPGDs) are radiation hard detectors, capable of detecting efficiently particle rates of several MHz/cm$^2$ , while exhibiting good spatial resolution ($\leq$ 50 $\mu$m) and modest…
We report the construction and commissioning of a new ultracold neutron (UCN) guide-coating facility at the University of Winnipeg. The facility employs pulsed laser deposition (PLD) to produce diamond-like carbon (DLC) coatings on…
A novel Resistive Plate Chamber (RPC) was designed with Diamond-Like Carbon (DLC) electrodes and performance studies were carried out for 384$\,\mathrm{\mu m}$ gap configuration with a $2\,\mathrm{cm}\times2\,\mathrm{cm}$ prototype. The use…