Related papers: Design and numerical simulation of thermionic elec…
We describe an algorithm which has been developed to extract fine granularity information from an electromagnetic calorimeter with strip-based readout. Such a calorimeter, based on scintillator strips, is being developed to apply particle…
The thermionic gridded gun is described which generates short electron bunches for further acceleration in a Nb3Sn conduction cooled SRF linac. The gun is built into the first cavity of the 250 keV injector [1] for the 20 kW, 10 MeV, 1.3…
Electrical measurement of nano-scale devices and structures requires skills and hardware to make nano-contacts. Such measurements have been difficult for number of laboratories due to cost of probe station and nano-probes. In the present…
The goal of this study is to evaluate the impact of the latest ILC beam parameters at the Interaction Point (IP), as specified in the 2013 ILC Technical Design Report (TDR), on beam losses in the extraction line. The previous beam loss…
This paper introduces a constructive method for approximating relative continuum measurements in two-dimensional electrical impedance tomography based on data originating from either the point electrode model or the complete electrode…
We investigate electrode geometries required to produce periodic 2-dimensional ion-trap arrays with the ions placed between two planes of electrodes. We present a generalization of previous methods for traps containing a single electrode…
In this work, a combination of cathode retraction and two-slit emittance measurement technique is proposed as an advanced means to individually modify emittance growth components, specifically, rf injector fringe fields, to isolate and…
A module of the ATLAS electromagnetic barrel liquid argon calorimeter was exposed to the CERN electron test-beam at the H8 beam line upgraded for precision momentum measurement. The available energies of the electron beam ranged from 10 to…
Accurate parameter dependent electro-chemical numerical models for lithium-ion batteries are essential in industrial application. The exact parameters of each battery cell are unknown and a process of estimation is necessary to infer them.…
A new ion source will be prepared for the CYCLONE30 commercial cyclotron with a much advanced performance compared with the previous one. The newly designed ion source has a very large transparency without deteriorating the beam optics,…
Thermionic emission has been exploited to give rise to the theory of thermionic cooling also known as electron transpiration cooling, which can potentially serve as a powerful and engineerable cooling mode for hypersonic leading edges that…
The 28 GHz ECR(Electron Cyclotron Resonance) ion source is under development to supply various beams from proton to uranium at RISP(Rare Isotope Science Project). The superconducting magnet system for a 28 GHz ECR ion source consists of…
Novel schemes for generating ultra-low emittance electron beams have been developed in the last years and promise compact particle sources with excellent beam quality suitable for future high-energy physics experiments and free-electron…
This study explores the excitation and ionization of an atomic beam as a pathway to optimize focused ion beams (FIBs) for high-precision applications. Leveraging the unique advantages of Rydberg excitation followed by field ionization --…
In this work, a single crystal CVD diamond film with a novel three-dimensional (3D) interdigitated electrode geometry has been fabricated with the Reactive Ion Etching (RIE) technique in order to increase the charge collection efficiency…
Stationary target measurements of the nucleon form factors have been performed with high precision down to $Q^2$ of $\sim$ 0.01 GeV$^2$ for protons ($G_E^p$) and down to $\sim$ 0.1 GeV$^2$ for neutrons ($G_M^n$). Conventional extraction…
An ideal electrometer should measure electric fields accurately while causing minimal disturbance to the field itself. Rydberg atomic electrometers are promising candidates for ideal electrometry due to their SI traceability and…
The fine-sampling electromagnetic calorimeter prototype has been experimentally tested using the 1-19 GeV/c tagged beams of negatively charged particles at the U70 accelerator at IHEP, Protvino. The energy resolution measured by electrons…
In this paper, electromagnetic emissions produced by a beam-plasma system are investigated using particle-in-cell simulations for the particular case when the typical transverse size of both 100 keV electron beam and produced plasma channel…
In this investigation, the numerical simulation of electrohydrodynamic (EHD) ion-drag micropumps with micropillar electrode geometries have been performed. The effect of micropillar height and electrode spacing on the performance of the…