Related papers: Does a dissolution-precipitation mechanism explain…
From soft polymeric gels to hardened cement paste, amorphous solids under constant load exhibit a pronounced time-dependent deformation called creep. The microscopic mechanism of such a phenomenon is poorly understood in amorphous materials…
For corrosion-induced cracking in reinforced concrete, naturally occurring corrosion rates are so low that rust accumulates often over tens of years near the surface of the reinforcement bars before sufficient pressure in the surrounding…
The solidification theory has been accepted as a thermodynamically sound way to describe the creep reduction due to deposition of hydrated material in the pores of concrete. The concept of self-equilibrated nanoscale microprestress has been…
Creep deformation in shale rocks is an important factor in many applications, such as the sustainability of geostructures, wellbore stability, evaluation of land subsidence, CO2 storage, toxic waste containment, and hydraulic fracturing.…
Pressure-solution is a chemo-mechanical process, involving dissolution at grain/asperity contacts and precipitation away from them. It induces a compaction in time of rocks and sediments. The present study investigates numerically the…
When carbon dioxide (CO2) is injected into an aquifer or a depleted geological reservoir, its dissolution into solution results in acidification of the pore waters. As a consequence, the pore waters become more reactive, which leads to…
Mechanical creep behaviors of natural gas hydrates (NGHs) are of importance for understanding mechanical instability of gas hydrate-bearing sediments on Earth. Limited by the experimental challenges, intrinsic creep mechanisms of…
Geomaterials often exhibit progressive creep characterized by an initial decelerating phase, frequently followed by an extended period of approximately constant deformation rate, and ultimately an accelerating regime leading to catastrophic…
The reporting and evaluation of creep tests of concrete is complicated by the fact that creep is significant even for the shortest observable load durations. Compared to the strain after 0.1 s load duration, the strain at 2 hour duration is…
Early age behaviour of concrete is based on complex multi-physical and multiscale phenomena. The predication of both cracking risk and residual stresses in hardened concrete structures is still a challenging task. We propose in this paper a…
Granular materials, composed of discrete solid grains, can be modeled as simple mechanical systems. However, these materials can undergo spontaneous slow deformation, or creep, even under small forces and while in apparent mechanical…
Understanding the physical origin of creep in calcium--silicate--hydrate (C--S--H) is of primary importance, both for fundamental and practical interest. Here, we present a new method, based on molecular dynamics simulation, allowing us to…
Concrete subjected to combined compressive stresses and temperature loading exhibits compressive strains, which are considerably greater than for concrete subjected to compressive stresses alone. This phenomenon is called transient thermal…
Corrosion in concrete prevents in-situ observation, necessitating models to provide insight into the local reaction currents. We present a computational method for predicting corrosion rates of reinforcements within concrete under natural…
Quasi-2D experiments of a submerged sediment layer creeping downward were performed, varying the channel tilt and a porous flow under the respective thresholds for yielding. Logarithmic decay rates of the deformation are observed, with the…
A micromechanical model at the microscale within a crystal plasticity self-consistent model, is used to analyse loading histories in Type 316H stainless steel, common to structural components in high-temperature power plants. The study…
Creep mechanisms in uniaxially compressed 3D granular solids comprised of faceted frictionless grains are studied numerically using a constant pressure and constant stress simulation method. Rapid uniaxial compression followed by slow…
Sloped terrains tend to creep downward over time, even when their slope is below the nominal angle of repose. This behavior can result from periodic variations in environmental conditions, such as daily or seasonal fluctuations in…
Creep is a generic descriptor of slow motions -- in the context of materials, it describes quasi-static deformation of a solid when subjected to stresses below the global yield, at which all rigidity collapses and the material flows. Here,…
Granular packings display a wealth of mechanical features which are of widespread significance. One of these features is creep: the slow deformation under applied stress. Creep is common for many other amorphous materials such as many…