Related papers: Effect of Al doping on phase formation and thermal…
In this work we investigate the process of iron nitride (Fe-N) phase formation using 2 at.% Al or 2 at.% Ti as additives. The samples were prepared with a magnetron sputtering technique using different amount of nitrogen during the…
We studied the effect of dopants (Al, Ti, Zr) on the thermal stability of iron nitride thin films prepared using a dc magnetron sputtering technique. Structure and magnetic characterization of deposited samples reveal that the thermal…
Fe4N is a well-known anti-perovskite compound exhibiting high magnetization, high chemical stability, low coercivity, high Curie temperature, and high spin-polarization ratio. Therefore, it is a viable candidate for applications in…
We investigated the influence of doping antiferromagnetic MnN in polycrystalline MnN/CoFe exchange bias systems, showing high exchange bias of up to 1800 Oe at room temperature. The thermal stability of those systems is limited by nitrogen…
The effect of Fe doping in the Mn site on the magnetic, transport and structural properties of polycrystalline La1/2Ca1/2MnO3 was studied. Doping with low Fe concentration (< 10%) strongly affects electrical transport and magnetization.…
The study uses AACVD technology with nitrogen carrier gas to make AZO thin films through which it determines structural, optical, and morphological changes from 0 to 20 percent aluminum doping. The depositions took place at 400 degrees…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
The structural, optical and magnetic properties of the Zn1-xMnxO (0 < x < 0.05) thin films synthesized by sol-gel technique have been analyzed in the light of modification of the electronic structure and disorder developed in the samples…
Transition metal aluminum nitrides are a technologically important class of multifunctional ceramics, however, the HfAlN system remains largely unexplored. We investigate phase stability, nanostructure design, and mechanical behavior of…
Achieving high temperature ferromagnetism by doping transition metals thin films is seen as a viable approach to integrate spin-based elements in innovative spintronic devices. In this work we investigated the effect of Fe doping on…
This study reports on the properties of nitrogen doped titanium dioxide $TiO_2$ thin films considering the application as transparent conducting oxide (TCO). Sets of thin films were prepared by sputtering a titanium target under oxygen…
In the present work, a thin film was deposited on quartz substrate by reactive RF magnetron sputtering of high purity (99.999%) aluminium target using ultra-high pure (Ar + N2) gas mixture. The percentage ratio of Ar and N2 in the gas…
Thin films of iron and permalloy Ni80Fe20 were prepared using an Ar+N2 mixture with magnetron sputtering technique at ambient temperature. The nitrogen partial pressure, during sputtering process was varied in the range of 0 to 100%,…
In this work, we studied phase formation, structural and magnetic properties of iron-nitride (Fe-N) thin films deposited using high power impulse magnetron sputtering (HiPIMS) and direct current magnetron sputtering (dc-MS). The nitrogen…
For a detailed study on the semiconductor to metal transition (SMT) in ZnO thin films doped with Al in the concentration range from 0.02 to 2%, we grew these films on (0001) sapphire substrates using sequential pulsed laser deposition. It…
It is shown that dilute niobium doping has significant effect on the ferromagnetism and microstructure of dilutely cobalt-doped anatase TiO2 films. Epitaxial films of anatase TiO2 with 3% Co, without and with 1% niobium doping were grown by…
Effects of Al, Mn and Sb dopings in CeFe2 and effect of applied pressure have been investigated. Al doping gives rise to the FM-AFM transition and a reduction in the magnetic moment and TC values, clearly indicating the growth of the AFM…
We report on an XPS study of AlN thin films grown on Si(100) substrates by ion beam sputter deposition (IBSD) in reactive assistance of N+/N2+ ions to unravel the compositional variation of their surface when deposited at different…
In this work, we studied cobalt nitride (Co-N) thin films deposited using a dc magnetron sputtering method at a substrate temperature (\Ts) of 523\,K. We find that independent of the reactive gas flow (\pn) used during sputtering, the…
Ion implantation of Fe and Mn into Al thin films was used for effective modification of Al superconductive properties. Critical temperature of the transition to superconducting state was found to decrease gradually with implanted Fe…