Related papers: CuSbSe2 photovoltaic devices with 3% efficiency
Lead halide perovskite solar cells have recently emerged as a very promising photovoltaic technology due to their excellent power conversion efficiencies; however, the toxicity of lead and the poor stability of perovskite materials remain…
Thin films are preferred for high photocurrent conversion efficiency, but strong photon absorption at photon energies below the bandgap (near and shortwave infrared) typically requires thicker semiconductor layers. To address this tradeoff,…
Cu(In,Ga)Se2 based solar cells exceed power conversion efficiencies of 23 %. Yet, the fill factor of these solar cells, with best values around 80 %, is relatively low (Si reaches 84.9%) mostly due to diode factors greater than one.…
Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that…
As the photovoltaic community accelerates the development of new absorber candidate materials towards high-performing PV devices, it is essential to follow best practices and leverage deeper characterization tools. We have identified…
Solar cells based on a light absorbing layer of the organometal halide perovskite CH$_3$NH$_3$PbI$_3$ have recently reached 15% conversion efficiency, though how these materials work remains largely unknown. We analyse the electronic…
Hybrid perovskite solar cells, with their power conversion efficiency (PCE) exceeding 22%, have been representing a revolutionary concept for future energy power generation. Although listed among the Top 10 Emerging Technologies of 2016,…
The quantum efficiencies (QE) of photocathodes consisting of bulk Nb substrates coated with thin films of Cs2Te are reported. Using the standard recipe for Cs2Te deposition developed for Mo substrates (220 {\AA} Te thickness), a QE ~11% -…
In this work, we demonstrate the performance of a silicon-compatible high-performance self-powered photodetector.A wide detection range from visible (405 nm) to near-infrared (1550 nm) light was enabled by the vertical p-n heterojunction…
The purpose of this work is to look for a practical structure for application of quantum dots (QD) in solar cells in order to enhance sub-band gap photon absorption. We focuse on a stack of strain-compensated GaSb/GaAs type-II QDs. We…
Maximum efficiency of ideal single-junction photovoltaic (PV) cells is limited to 33% (for one sun illumination) by intrinsic losses such as band edge thermalization, radiative recombination, and inability to absorb below-bandgap photons.…
The electronic and optical properties of low-dimensional semiconductors are typically quite different from those of their bulk counterparts. Yet, the optical gap of two-dimensional copper antimony disulfide (CuSbS$_2$) does not dramatically…
The efficiency of solution-processed colloidal quantum dot (QD) based solar cells is limited by poor charge transport in the active layer of the device, which originates from multiple trapping sites provided by QD surface defects. We apply…
Cu2ZnSnS(e)4 (CZTS(e)) solar cells have attracted much attention due to the elemental abundance and the non-toxicity. However, the record efficiency of 12.6% for Cu2ZnSn(S,Se)4 (CZTSSe) solar cells is much lower than that of Cu(In,Ga)Se2…
We conduct a comprehensive assessment of the electronic and optical properties, as well as photovoltaic (PV) performance parameters for Mg$_{2}$Si and Ca$_{2}$Si using density-functional theory and Bethe-Salpeter equation (BSE) based…
We present state-of-the-art first-principle calculations of the electronic and optical properties of silicon allotropes with interesting characteristics for applications in thin-film solar cells. These new phases consist of distorted sp$^3$…
Here, we report the full-fledged journey towards the material synthesis and characterization of few-layered/thin WSe$_2$ using sputtered W-films on SiO$_2$/Si substrates followed by electrical studies under dark and illumination conditions.…
In future solar cell technologies, the thermodynamic Shockley-Queisser limit for solar-to-current conversion in traditional p-n junctions could potentially be overcome with a bulk photovoltaic effect by creating an inversion broken symmetry…
We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used…
Thin-film photovoltaic (PV) technologies address crucial challenges in solar energy applications, including scalability, cost-effectiveness, and environmental sustainability. This paper reviews critically, thin-film technologies such as…