Related papers: CuSbSe2 photovoltaic devices with 3% efficiency
Indoor photovoltaics (IPVs) have attracted increasing attention for sustainably powering Internet of Things (IoT) electronics. Sb$_2$S$_3$ is a promising IPV candidate material with a bandgap of ~1.75 eV, which is near the optimal value for…
$CuGa_3Se_5$ is a promising candidate material with wide band gap for top cells in tandem photovoltaic (PV) and photoelectrochemical (PEC) devices. However, traditional CdS contact layers used with other chalcopyrite absorbers are not…
A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems by using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell,…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…
Implementation of an optically active material on silicon has been a persistent technological challenge. For tandem photovoltaics using a Si bottom cell, as well as for other optoelectronic applications, there has been a longstanding need…
Energy states below the bandgap of a semiconductor, such as trap states or charge transfer states in organic donor acceptor blends, can contribute to light absorption. Due to their low number density or ultrasmall absorption cross-section,…
Cu2ZnSn(S, Se)4 (CZTSSe) is one of most competitive photovoltaic materials for its earth-abundant reserves, environmental friendliness, and high stability.The quality of CZTSSe absorber determines the power-conversion efficiency (PCE) of…
The thermodynamic limit of photovoltaic efficiency for a single-junction solar cell can be readily predicted using the bandgap of the active light absorbing material. Such an approach overlooks the energy loss due to non-radiative…
A high photon to electricity conversion efficiency of 47.2082% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a quadruple junction solar cell design. The electronic bandgap of…
It is currently possible to fabricate crystalline silicon solar cells with the absorber thickness ranging from a few hundreds of micrometers (conventional wafer-based cells) to devices as thin as $1\,\mu\mathrm{m}$. In this work, we use a…
Ultrathin planar absorbing layers, including semiconductor and metal films, and 2D materials, are promising building blocks for solar energy harvesting devices but poor light absorption has been a critical issue. Although interference in…
The effects of thickness, doping concentration and recombination of AlSb films on the performance of CdS/AlSb cells are simulated by one dimensional simulation program called analysis of microelectronic and photonic structures(AMPS1D) soft…
Recent approaches to develop infrared photodetectors characterized by high sensitivities, broadband spectral coverage, easy integration with silicon electronics and low cost have been based on hybrid structures of transition metal…
In this work, a metamaterial selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the…
Heterostructured quantum dots (QDs) based on narrow-gap PbSe and wide-gap CdSe have been studied with an eye on their prospective applications in near-infrared (NIR) light sources, photodetectors, and solar cells. The most common structural…
Cs-based semiconductors like $\mathrm{Cs_3Sb}$ and $\mathrm{Cs_2Te}$ are currently used as photocathodes in particle accelerators. Their performance as electron sources critically depends on their interaction with intense laser sources. In…
Photovoltaic materials facilitate the conversion of sunlight into electricity by harnessing the interaction between light and matter, offering an eco-friendly and cost-efficient energy solution. Combining data-driven approaches with static…
We report on the fabrication and optimization of semi-transparent antimony sulfide (Sb$_2$S$_3$) thin-film solar cells in a superstrate configuration, using RF magnetron sputtering of metallic antimony followed by post-deposition…
Broadband infrared photodetectors have profound importance in diverse applications including security, gas sensing, bioimaging, spectroscopy for food quality, and recycling, just to name a few. Yet, these applications can currently be…
Efficient semi-transparent solar cells can trigger the adoption of building integrated photovoltaics. Halide perovskites are particularly suitable in this respect owing to their tunable bandgap. Main drawbacks in the development of…