Related papers: Identification of annealing temperature for high-$…
Differential scanning calorimetry (DSC) is one of the most versatile probes for silicate glasses, allowing determination of, e.g., transition temperatures (glass, crystallization, melting) and the temperature dependence of heat capacity.…
Ferroelectricity in sputtered undoped-HfO$_2$ is attractive for composition control for low power and non-volatile memory and logic applications. Unlike doped HfO$_2$, evolution of ferroelectricity with annealing and film thickness effect…
Integration of thin-film oxide piezoelectrics on glass is imperative for the next generation of transparent electronics to attain sensing and actuating functions. However, their crystallization temperature (above 650 {\deg}C) is…
Dielectric relaxation and thermal expansion spectroscopy were made for thin polystyrene films in order to measure the temperature $T_{\alpha}$ corresponding to the peak in the loss component of susceptibility due to the $\alpha$-process and…
It was experimentally found that the evolution of dielectric loss with processing temperature displays a common trend in ferroelectric and dielectric thin oxide films: firstly an increase and then a decrease in dielectric loss when the…
We investigate the effect of annealing temperature on the crystalline structure and physical properties of tantalum-pentoxide films grown by radio frequency magnetron sputtering. For this purpose, several tantalum films were deposited and…
Laser annealing offers a promising route to back end of the line fabrication of ferroelectric thin film transistors based on hafnium-zirconium oxide (HZO). Due to the wide band gap of this material, previous reports have studied the…
In this paper we proclaim excellent variation control in Hf$_{0.5}$Zr$_{0.5}$O$_2$ based ferroelectric films obtained by germination of large ferroelectric domain via extended duration of thermal annealing. 10nm thick…
The glass transition temperature $T_g$ and the temperature $T_{\alpha}$ corresponding to the peak in the dielectric loss due to the $\alpha$-process have been simultaneously determined as functions of film thickness $d$ through dielectric…
The temperature dependence of the x-ray scattering in the region below the first sharp diffraction peak was measured for silica glasses with low and high OH content (GE-124 and Corning 7980). Data were obtained upon scanning the temperature…
Nanolaminated Al2O3/HfO2 thin films as well as single Al2O3 and HfO2 layers have been grown as gate dielectrics by Plasma Enhanced Atomic Layer Deposition (PEALD) technique on silicon carbide (4H-SiC) substrates. All the three dielectric…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
Measurements of thermal diffusivity \k{appa} (using laser flash analysis) for temperatures from 100 {\deg}C to 1200 {\deg}C and of the inversion parameter x (using X-ray analysis) for the single crystal spinel MgGa2O4 have been performed.…
We present a simple method for fast and cheap thermal analysis on supercooled glass-forming liquids. This "Thermalization Calorimetry" technique is based on monitoring the temperature and its rate of change during heating or cooling of a…
The glass transition temperature $T_{\rm g}$ and the temperature $T_{\alpha}$ corresponding to the peak in the dielectric loss due to the $\alpha$-process have been simultaneously determined as functions of film thickness d through…
Thermochromic vanadium dioxide thin films have attracted much attention recently for constructing variable-emittance coatings upon its insulator-metal phase transition for dynamic thermal control. However, fabrication of high-quality…
The oxidation behavior of W-Zr thin-film metallic glasses (TFMGs) with 32, 48 and 61 at.% Zr, prepared by dc magnetron co-sputtering, was comprehensively studied after annealing in synthetic air. The study focuses on the effect of the…
A Li-Al-O thin film materials library, deposited by inert magnetron sputtering and post-deposition annealing in O2 atmosphere, was used to study the effects of different annealing temperatures (300 to 850{\deg}C) and durations (1 min to 7…
Room-temperature 1535-nm-band photoluminescence in ~126 nm silica films (6 at. % doping), produced by spin-coating an Er2O3 and tetraethylorthosilicate sol-gel formulation on silicon substrates, was studied as a function of vacuum furnace…
Indium-tin oxide (ITO) is a crucial functional layer for the optoelectronic applications, such as non-volatile color display thin films based on the ITO/phase-change material (PCM)/ITO/reflective metal multilayer structures on a silicon…