Related papers: The reversible lithiation of SnO: a three-phase pr…
Vertical $pn$ heterojunction diodes were prepared by plasma-assisted molecular beam epitaxy of unintentionally-doped $p$-type SnO layers with hole concentrations ranging from $p=10^{18}$ to $10^{19}$cm$^{-3}$ on unintentionally-doped…
An extensive search for low-energy lithium defects in crystalline silicon using density-functional-theory methods and the ab initio random structure searching (AIRSS) method shows that the four-lithium-atom substitutional point defect is…
The 3D ternary Li_4Ti_5O_12, the Li+-based battery anode, presents the unusual lattice symmetry (a triclinic crystal), band structure, charge density, and density of states, under the first-principles calculations. It belongs to a large…
Advancing new ideas of rechargeable batteries represents an important path to meeting the ever increasing energy storage needs. Recently we showed rechargeable sodium/chlorine (Na/Cl$_2$) (or lithium/chlorine Li/Cl$_2$) batteries that used…
In this study, we address the challenge of electrolyte degradation in all-solid-state humidified Li-$O_2$ batteries, which offer high theoretical energy density and potential cost advantages over conventional lithium-ion batteries.…
B$_5$Se this work we investigate the Li adsorption properties of a hybrid 2D material, namely monolayer B5Se with first principles calculations. 2 dimensional B$_5$Se was found to have a distorted hexagonal structure with five B atoms and…
Enabling lithium (Li)-ion batteries with higher energy densities, longer cycle life, and lower costs will underpin the widespread electrification of the transportation and large-scale energy storage industries. Nickel (Ni)-rich layered…
We have studied low-temperature magnetic properties as well as high-temperature lithium ion diffusion in the battery cathode materials LixNi1/3Co1/3Mn1/3O2 by the use of muon spin rotation/relaxation. Our data reveal that the samples enter…
Computational modeling is vital for the fundamental understanding of processes in Li-ion batteries. However, capturing nanoscopic to mesoscopic phase thermodynamics and kinetics in the solid electrode particles embedded in realistic…
Several active areas of research in novel energy storage technologies, including three-dimensional solid state batteries and passivation coatings for reactive battery electrode components, require conformal solid state electrolytes. We…
Nano-structured silicon anodes are attractive alternatives to graphite in Li-ion batteries. Despite recent remarkable progresses in numerous Si-C composites, the commercialisation with significance is still limited. One of the most critical…
Inactive lithium (Li) formation is the immediate cause of capacity loss and catastrophic failure of Li metal batteries. However, the chemical component and the atomic level structure of inactive Li have rarely been studied due to the lack…
By employing a mixed SnO$_2$+Sn source, we demonstrate suboxide molecular beam epitaxy growth of phase-pure single crystalline metastable SnO(001) thin films at a growth rate of ~1.0nm/min without the need for additional oxygen. These films…
Structural and ion-ordering phase transitions limit the viability of sodium-ion intercalation materials in grid scale battery storage by reducing their lifetime. However, the combination of phenomena in nanoparticulate electrodes creates…
A novel non-destructive methodology for operando observation of ion intercalation and the state of charge on battery electrodes is presented based on spectroscopic ellipsometry (SE). The potentiality of this technique for performing…
Garnet-type Li$_{6.25}$Al$_{0.25}$La$_3$Zr$_2$O$_{12}$ (Al-LLZO) solid electrolytes are promising for all-solid-state batteries but are limited by interfacial resistance. In this work, dense and graded tri-layer Al-LLZO electrolytes were…
High oxidation potential indicates anodes have high oxidation power and high current efficiency for organics oxidation. In this paper, we prepared Ti/Cu-SnO2 anodes using spray pyrolysis method. The Ti/Cu-SnO2 anodes have an ultra-high…
Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes…
The properties of rechargeable lithium-ion batteries are determined by the electrochemical and kinetic properties of their constituent materials as well as by their underlying microstructure. Microstructural design can be leveraged to…
Downsizing well-established materials to the nanoscale is a key route to novel functionalities, in particular if different functionalities are merged in hybrid nanomaterials. Hybrid carbon-based hierarchical nanostructures are particularly…