Related papers: Improved Scatter Correction in X-Ray Cone Beam CT …
Quantitative PET attenuation correction (AC) for combined cardiac PET/MR is a challenging problem. We propose and evaluate an AC approach that uses coincidences from a relatively weak and physically fixed sparse external source, in…
This paper proposes a method for detecting multiple scatterers (targets) in the elevation direction for synthetic aperture radar (SAR) tomography. The proposed method can resolve closely spaced targets through a twostep procedure. In the…
Adaptive Radiation Therapy (ART) was developed based on Image-guided Radiation Therapy (IGRT) and it is the trend of photon radiation therapy. To get a better use of Cone Beam CT (CBCT) images for ART, the CBCT system model was established…
High quality reconstruction with interventional C-arm cone-beam computed tomography (CBCT) requires exact geometry information. If the geometry information is corrupted, e. g., by unexpected patient or system movement, the measured signal…
Sparse-view computed tomography (CT) is an effective method to reduce the radiation exposure in medical imaging. To reduce the severe streaking artifacts that occur in reconstructed images due to violation of the Nyquist/Shannon sampling…
Purpose: We have been investigating 2D antiscatter grids (2D ASG) to reduce scatter fluence and improve image quality in cone beam computed tomography (CBCT). In this work, two different aspects of 2D ASGs, their scatter rejection and…
Objective: Long-axial field-of-view (LAFOV) positron emission tomography (PET) systems allow higher sensitivity, with an increased number of detected lines of response induced by a larger angle of acceptance. However, this extended angle…
Preserving beam quality during the transportation of high-brightness electron beams is a significant and widespread challenge in the design of modern accelerators. The importance of this issue stems from the fact that the quality of the…
During spinal fusion surgery, screws are placed close to critical nerves suggesting the need for highly accurate screw placement. Verifying screw placement on high-quality tomographic imaging is essential. C-arm Cone-beam CT (CBCT) provides…
Purpose: Patient movement affects image quality in oral and maxillofacial cone-beam CT imaging. While many efforts are made to minimize the possibility of motion during a scan, relatively little attention has been given to motion…
Industrial X-ray cone-beam CT (XCT) scanners are widely used for scientific imaging and non-destructive characterization. Industrial CBCT scanners use large detectors containing millions of pixels and the subsequent 3D reconstructions can…
X-ray imaging dose from serial cone-beam CT (CBCT) scans raises a clinical concern in most image guided radiation therapy procedures. It is the goal of this paper to develop a fast GPU-based algorithm to reconstruct high quality CBCT images…
For long time non-pure beta emitters are avoided from PET imaging due to extra dose and increase in background from Compton scattering. But advent of high-resolution Compton camera system opens up new domain of imaging. Various non-pure…
To make full use of photocathode material and improve its quantum efficiency lifetime, it can be necessary to operate laser away from the cathode center in photoinjectors. In RF guns, the off-axis emitted beam will see a time-dependent RF…
This work is concerned with fan- and cone-beam computed tomography with circular source trajectory, where the reconstruction inverse problem requires an accurate knowledge of source, detector and rotational axis relative positions and…
Computed Tomography (CT) is a technology that reconstructs cross-sectional images using X-ray images taken from multiple directions. In CT, hundreds of X-ray images acquired as the X-ray source and detector rotate around a central axis, are…
Radio interferometry has always faced the problem of incomplete sampling of the Fourier plane. A possible remedy can be found in the promising new theory of compressed sensing (CS), which allows for the accurate recovery of sparse signals…
Since X-ray tomography is now widely adopted in many different areas, it becomes more crucial to find a robust routine of handling tomographic data to get quality reconstructed images. Though there are several existing techniques, it seems…
With a Bayesian approach, the linear optics correction algorithm for storage rings is revisited. Starting from the Bayes' theorem, a complete linear optics model is simplified as "likelihood functions" and "prior probability distributions".…
We propose a correction to the conventional Rytov approximation (RA) and investigate its performance for predicting wave scattering under strong scattering conditions. An important motivation for the correction and investigation is to help…