Related papers: Quantitative tracking of grain structure evolution…
Rate of grain growth, which aides in achieving desired properties in polycrystalline materials, is conventionally estimated by measuring the size of grains and tracking its change in micrographs reflecting the temporal evolution. Techniques…
The crystalline quality and degree of c-axis orientation of hexagonal AlN thin films correlate directly with their functional properties. Therefore, achieving AlN thin films of high crystalline quality and texture is of extraordinary…
It is shown here that fracture after a brief plastic strain, typically of a few percents, is a necessary consequence of the polycrystalline nature of the materials. The polycrystal undergoing plastic deformation is modeled as a flowing…
Nanocrystalline metals typically have high fatigue strengths, but low resistance to crack propagation. Amorphous intergranular films are disordered grain boundary complexions that have been shown to delay crack nucleation and slow crack…
We study three structurally different states of nanocrystalline 316 steel and show that the state, where boundaries containing excess concentration of alloying elements are combined with mobile dislocations in grain interiors, allows…
A clear understanding of the dynamic behavior of metals is critical for developing superior structural materials as well as for improving material processing techniques such as cold spray and shot peening. Using a high velocity (from 120…
The statistical-thermodynamic dislocation theory developed in previous papers is used here in an analysis of yielding transitions and grain-size effects in polycrystalline solids. Calculations are based on the 1995 experimental results of…
We consider the grain growth and stagnation in polycrystalline microstructures. From the phase field crystal modelling of the coarsening dynamics, we identify a transition from a grain-growth stagnation upon deep quenching below the melting…
Nanocrystalline metals and ceramics with <100 nm grain sizes and superior properties (e.g., mechanical strength, hardness, fracture toughness and stored dielectric energy) are of great interest. Much has been discussed about achieving nano…
Understanding the grain boundary deformation dynamics is very crucial to designing materials with stable microstructures. With this quest, the deformation behavior of coherent twin boundary under cyclic shear loading has been studied in…
In nuclear fusion reactors, tungsten will be exposed to high neutron loads at high temper atures (>900 C). The evolution and degradation of the mechanical properties under these conditions is uncertain and therefore constitutes a major…
Thermodynamic dislocation theory incorporating dislocation impediment by the grain boundaries is developed to analyze the shear test of polycrystals. With a small set of physics based material parameters, we are able to simulate the…
The deformation behavior of single crystal and nanocrystalline nickel were studied using in situ micropillar compression experiments from quasi-static to high strain rates up to 10^3 s-1. Deformation occurred by dislocation slip activity in…
The effect of grain size on the flow stress of FCC polycrystals is analyzed by means of a multiscale strategy based on computational homogenization of the polycrystal aggregate. The mechanical behavior of each crystal is given by a…
We used nonequilibrium molecular dynamics simulations to study the shear deformation of metallic composites composed of alternating layers of Cu and Au. Our simulations reveal the formation of "vortices" or "swirls" if the bimaterial…
Composite of two kinds of grains is modeled in two-dimension and the elasticity is calculated using molecular dynamics method implementing Gear predictor-corrector of fifth order. It has been observed that same composite concentration can…
We study the local and global roughness scaling in growth models with grains at the film surfaces. The local roughness, measured as a function of window size r, shows a crossover at a characteristic length r_c, from a rapid increase with…
The evolution of a pile of granular material is investigated by molecular dynamics using a new model including nonsphericity of the particles instead of introducing static friction terms. The angle of repose of the piles as well as the…
Hybrid Monte Carlo (MC)/molecular dynamics (MD) simulations are conducted to study the microstructures of nanocrystalline (nc) Cu/Ag alloys with various Ag concentrations. When the Ag concentration is below 50 Ag atoms/nm!, an increase in…
The dynamics of dislocation assemblies in deforming crystals indicate the emergence of collective phenomena, intermittent fluctuations and strain avalanches. In polycrystalline materials, the understanding of plastic deformation mechanisms…