Related papers: Comment on the "Decrease of the surface resistance…
Experimental data on N-doped superconducting (sc) cavities are further analyzed which contribute to confirm a recently proposed model explaining the increase of the Q-value versus the accelerating gradient.
Future particle accelerators such as the the SLAC ``Linac Coherent Light Source-II'' (LCLS-II) and the proposed Cornell Energy Recovery Linac (ERL) require hundreds of superconducting radio-frequency (SRF) cavities operating in continuous…
Superconducting radio-frequency (SRF) niobium cavities are critical for modern particle accelerators, as well as for advancing superconducting quantum systems and enabling ultra-sensitive searches for new physics. In this work, we report a…
Impurity-doping is an exciting new technology in the field of SRF, producing cavities with record-high quality factor $Q_0$ and BCS surface resistance that decreases with increasing RF field. Recent theoretical work has offered a promising…
For many new accelerator applications, superconducting radio frequency (SRF) systems are the enabling technology. In particular for CW applications, much effort is being expended to minimize the power dissipation (surface resistance) of…
We report on an effort to improve the performance of superconducting radiofrequency cavities by the use of heat treatment in a temperature range sufficient to dissociate the natural surface oxide. We find that the residual resistance is…
Recently, Nb superconducting radio frequency cavities vacuum heat treated between 300-400 C for a few hours have exhibited very high quality factors (~5x10^10 at 2.0 K). New secondary ion mass spectrometry measurements of O, N and C show…
We report the rf performance of a single-cell superconducting radiofrequency cavity after low temperature baking in a nitrogen environment. A significant increase in quality factor has been observed when the cavity was heat treated in the…
Point contact tunneling (PCT) spectroscopy measurements are reported over wide areas of cm-sized cut outs from niobium superconducting RF cavities. A comparison is made between a high-quality, conventionally processed (CP) cavity with a…
We report the finding of new surface treatments that permit to manipulate the niobium resonator nitrogen content in the first few nanometers in a controlled way, and the resonator fundamental Mattis-Bardeen surface resistance and residual…
Superconducting radiofrequency (SRF) cavities are the leading technology for highly efficient particle acceleration, and their performance can be significantly enhanced through the controlled introduction of interstitial impurities into…
The dependence of the Q-value on the RF field (Q-slope) is actively studied in various accelerator laboratories. Although remedies against this dependence have been found, the physical cause still remains obscure. A rather straightforward…
Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic…
The Q-factor of superconducting accelerating cavities can be substantially improved by a special heat treatment under N2 atmosphere (N-doping). Recent experiments at Fermi National Laboratory investigated the dependence of Q on the RF…
We present results on the effects of interstitial oxygen and carbon on a bulk-niobium superconducting radio-frequency cavity. Previous experiments have shown that high-temperature (~800 $^\circ\text{C}$) nitrogen-doping plays the dominant…
Performance of superconducting resonators, particularly cavities for particle accelerators and micro cavities and thin film resonators for quantum computations and photon detectors has been improved substantially by recent materials…
We applied heat treatments to 80.5 MHz quarter-wave resonators made from bulk niobium and prepared with buffered chemical polishing BCP. We evaluated their performance at 4.3 K. We found that a 48 hour, 120 C bake-out ("low-temperature bake…
An apparatus was developed to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This…
A detailed study of the near-surface structure and composition of Nb, the material of choice for Superconducting Radio Frequency accelerator (SRF) cavities, is of great importance in order to understand the effects of different treatments…
A simplified numerical model has been developed to simulate non-linear superconducting radiofrequency (SRF) losses on Nb surfaces. This study focuses exclusively on excessive surface resistance (Rs) losses due to the microscopic…