Related papers: Reference Receiver Based Digital Self-Interference…
For future wireless communication systems, full duplex is seen as a possible solution to the ever present spectrum shortage. The key aspect to enable In-Band Full Duplex (IBFD) is sufficient cancellation of the unavoidable Self-Interference…
Although the hardware complexity of the analog self-interference canceller in full duplex Multiple Input Multiple Output (MIMO) designs does not necessarily scale with the number of transceiver antennas, exploiting the benefits of analog…
In this paper we provide an overview regarding the feasibility of in-band full-duplex transceivers under imperfect RF components. We utilize results and findings from the recent research on full-duplex communications, while introducing also…
In this article, we propose sampled-data design of digital filters that cancel the continuous-time effect of coupling waves in a single-frequency full-duplex relay station. In this study, we model a relay station as a continuoustime system…
In future full-duplex communications, the cancellation of self-interference (SI) arising from hardware non-idealities will play an important role in the design of mobile-scale devices. To this end, we introduce an optimal digital SI…
Full-duplex communication systems have the potential to achieve significantly higher data rates and lower latency compared to their half-duplex counterparts. This advantage stems from their ability to transmit and receive data…
Recently, full-duplex (FD) communications with simultaneous transmission and reception on the same channel has been proposed. The FD receiver, however, suffers from inevitable self-interference (SI) from the much more powerful transmit…
The fundamental problem in the design of a full-duplex radio is the cancellation of the self-interference (SI) signal generated by the transmitter.Current techniques for suppressing SI rely on generating a copy of the SI signal and…
This paper presents the performance analysis of the self-interference cancellation (SIC) methods in full-duplex largescale multiple-input multiple-output systems. To mitigate selfinterference (SI), we assume that the full duplex-base…
Self-interference (SI) significantly limits the performance of full-duplex (FD) radio devices if not properly cancelled. State-of-the-art SI cancellation (SIC) techniques at the receive chain implicitly set an upper bound on the transmit…
In this article, we address the challenges of transmitter-receiver isolation in \emph{mobile full-duplex devices}, building on shared-antenna based transceiver architecture. Firstly, self-adaptive analog RF cancellation circuitry is…
Modern radio systems and transceivers utilize carrier aggregation (CA) to meet the demands for higher and higher data rates. However, the adoption of CA in the existing Long Term Evolution (LTE)-Advanced and emerging 5G New Radio (NR)…
Incorporating full duplex operation in Multiple Input Multiple Output (MIMO) systems provides the potential of boosting throughput performance. However, the hardware complexity of the analog self-interference canceller scales with the…
Full-duplex (FD) is an attractive technology that can significantly boost the throughput of wireless communications. However, it is limited by the severe self-interference (SI) from the transmitter to the local receiver. In this paper, we…
We present an experiment-based characterization of passive suppression and active self-interference cancellation mechanisms in full-duplex wireless communication systems. In particular, we consider passive suppression due to antenna…
In carrier-aggregation systems, digital baseband cancelation of self-interference generated by receiver nonlinearity requires the estimation of several reference signals contributions. As the nonlinearity order and frequency selectivity of…
In this paper, we propose a wideband Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) communication system comprising of an FD MIMO node simultaneously communicating with two multi-antenna UpLink (UL) and DownLink (DL) nodes utilizing…
There have been recent works on enabling in-band full-duplex operation using millimeter-wave (mmWave) transceivers. These works are based solely on creating sufficient isolation between a transceiver's transmitter and receiver via…
In-band full-duplex systems can transmit and receive information simultaneously on the same frequency band. However, due to the strong self-interference caused by the transmitter to its own receiver, the use of non-linear digital…
In this letter, we proposed a shared-antenna full-duplex massive MIMO model for the multiuser MIMO system. This model exploits a single antenna array at the base station (BS) to transmit and receive the signals simultaneously. It has the…