Related papers: Membrane-less hydrogen bromine flow battery
The entirely soft and transformable room-temperature liquid metal battery based on 3D hybrid printing was proposed and experimentally demonstrated. Liquid metal gallium and conductive gel were employed as the negative and positive electrode…
We report a neutral salt water based battery which uses p-type and n-type solution processed polymer films as the cathode and the anode of the cell. The specific capacity of the electrodes (approximately 30 mAh cm-3) is achieved via…
Liquid metal batteries (LMBs) are discussed today as a cheap grid scale energy storage, as required for the deployment of fluctuating renewable energies. Built as a stable density stratification of two liquid metals separated by a thin…
Rechargeable lithium metal batteries (LMBs) with an ultrahigh theoretical energy density have attracted more and more attentions for their crucial applications of portable electronic devices, electric vehicles, and smart grids. However, the…
Thermophotovoltaic systems in principle enable utilization of heat that is usually regarded as wasted energy. However, the wavelength selectivity of the thermal emitter required for high efficiencies is rather difficult to control with…
First principles based DFT calculations performed to insight structural and electronic properties of Boron doped Magnesium atom decorated graphene sheet for application of hydrogen storage. The four H2 molecules stably binds magnesium atom…
The explosive growth of electric vehicles (EVs) is leading to a surge in retired EV batteries, which are typically recycled despite having nearly 80% available capacity. Repurposing automotive batteries for second-use battery energy storage…
Lithium-ion batteries are widely used in electric vehicles and grid energy storage systems. Compared to cylindrical batteries, prismatic cells are the primary choice because of their advantage for dense packing. However, thermal runaway and…
The memory wall bottleneck is a key challenge across many data-intensive applications. Multi-level FeFET-based embedded non-volatile memories are a promising solution for denser and more energy-efficient on-chip memory. However, reliable…
Lithium-ion batteries are extensively utilized as the primary power source for electric vehicles due to their high energy density, environmental friendliness and lightweight nature. However, their performance and safety are highly dependent…
Major challenges of micro thermal machines are the thermal insulation and mechanical tolerance in the case of sliding piston. Switching from piston to membrane in microengines can alleviate the latest and lead to planar architectures.…
This work expands on our recently introduced low Mach enthalpy method [1] for simulating the melting and solidification of a phase change material (PCM) alongside (or without) an ambient gas phase. The method captures PCM's volume change…
The current rechargeable battery technologies have a failure in their performance at high pressure and temperature. In this article, we have brought theoretical insights on using boron nitride flakes as a protecting layer for a lithium-ion…
The aim of this paper is to develop a stability theory and a numerical model for the three density-stratified electrically conductive liquid layers. Using regular perturbation methods to reduce the full 3d problem to the shallow layer…
An important objective of designing lithium-ion rechargeable battery cells is to maximize their rate performance without compromising the energy density, which is mainly achieved through computationally expensive numerical simulations at…
Quantum batteries, as highly efficient energy storage devices, have garnered significant research interest. A key challenge in their development is to maximize the extractable energy (ergotropy) when operating within a finite-temperature…
Efficient thermal management in high-power electronics cooling can be achieved using phase-change heat transfer devices, such as vapor chambers. Traditional vapor chambers use wicks to transport condensate for efficient thermal exchange and…
Lightweight 2D materials due to its large surface area are being studied for its hydrogen storage applications. The characteristics of hydrogen adsorption on the electric field-induced h-BN bilayer were investigated. The overall storage…
Integrating external heat into electrolysers can reduce the electrical power demand for carbon-neutral hydrogen production. Efficient operation requires detailed models that incorporate heat availability and its effect on startup costs.…
Solid-state batteries (SSBs) have recently been proposed as promising alternatives to conventional Li-ion batteries because of their high level of safety and power density. The engineering of SSBs requires comprehensive modeling of their…