Related papers: Comparison of Electron Cloud Mitigating Coatings U…
An accelerator beam can generate low energy electrons in the beam-pipe, generally called electron cloud, that can produce instabilities in a positively charged beam. One method of measuring the electron cloud density is by coupling…
Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilab's Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the…
Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilabs Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast…
Electron clouds forming inside the beam vacuum chamber due to photoemission and secondary emission may limit the accelerator performance. Specifically, the electron clouds can blow up the vertical emittance of a positron beam, through a…
Deposition of low secondary electron yield (SEY) carbon coatings by magnetron sputtering onto the inner walls of the accelerator seems to be the most promising solution for suppressing the electron cloud problem. However, these coatings…
The buildup of low-energy electrons has been shown to affect the performance of a wide variety of particle accelerators. Of particular concern is the persistence of the cloud between beam bunch passages, which can impose limitations on the…
We report on the design, deployment and signal analysis for shielded button electrodes sensitive to electron cloud buildup at the Cornell Electron Storage Ring. These simple detectors, derived from a beam-position monitor electrode design,…
The electron cooler of the CRYRING@ESR storage ring at the GSI-FAIR accelerator complex is a unique instrument, which not only provides beam cooling of the stored ions, but also serves as a low-energy electron target for Dielectronic…
In order to minimize the emittance at the Cornell Electron Storage Ring (CESR), we measure and correct the orbit, dispersion, and transverse coupling of the beam. However, this method is limited by finite measurement resolution of the…
In the beam pipe of the positron damping ring of the Next Linear Collider, electrons will be created by beam interaction with the surrounding vacuum chamber wall and give rise to an electron cloud. Several solutions are possible for…
We report on extensive measurements at the Cornell Electron-positron Storage Ring of electron-cloud-induced betatron tune shifts for trains of positron bunches at 2.1 and 5.3 GeV with bunch populations ranging between 0.64x10^10 and…
Electron cloud effects have become one of the main performance limitations for circular particle accelerators operating with positively-charged beams. Among other machines worldwide, the CERN Super Proton Synchrotron (SPS), as well as the…
During the current run of an electron-positron collider DAFNE special electrodes for electron cloud suppression have been inserted in all dipole and wiggler magnets of the positron ring. In this paper we discuss the impact of these…
We present a brief summary of various aspects of the electron-cloud effect (ECE) in accelerators. For further details, the reader is encouraged to refer to the proceedings of many prior workshops, either dedicated to EC or with significant…
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started developing a robotic plasma deposition technique for $in-situ$ coating…
Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure…
The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud…
The Relativistic Electron Facility for Education and Research (REFER) at Hiroshima University accepts a 150 MeV electron beam from a microtron, the injector to the 700 MeV storage ring of the Hiroshima Synchrotron Research Center, and keep…
The measurement of electron cloud densities in particle accelerators using microwaves has proven to be an effective, non-invasive and inexpensive method. So far the experimental schemes have used continuous waves. This has either been in…
The High Energy Transmission Grating (HETG) Spectrometer on the Advanced X-ray Astrophysics Facility (AXAF) (scheduled for launch in August, 1998) will provide a new tool for the study of absorption in the X-ray spectra of high redshift…