Related papers: Ultra low noise YBCO nanoSQUIDs implementing nanow…
DC superconducting quantum interference devices (dc-SQUIDs) were fabricated in Co-doped BaFe2As2 epitaxial films on (La, Sr)(Al, Ta)O3 bicrystal substrates with 30deg misorientation angles. The 18 x 8 micro-meter^2 SQUID loop with an…
Nano-constriction based spin Hall nano-oscillators (SHNOs) are at the forefront of spintronics research for emerging technological applications such as oscillator-based neuromorphic computing and Ising Machines. However, their…
We report on the development of an ultralow noise thin-film based SQUID magnetometer. A niobium thin-film pickup coil is connected to the input coil of a SQUID current sensor. The low capacitance of the used sub-micrometer cross-type…
Planar Josephson junctions (JJs) based on InSb nanoflags have recently emerged as an intriguing platform in superconducting electronics. This letter presents the fabrication and investigation of superconducting quantum interference devices…
Focused ion beam (FIB) technology has been used to fabricate miniature Nb DC SQUIDs which incorporate resistively-shunted microbridge junctions and a central loop with a hole diameter ranging from 1058 nm to 50 nm. The smallest device, with…
A single-spin qubit placed near the surface of a conductor acquires an additional contribution to its $1/T_1$ relaxation rate due to magnetic noise created by electric current fluctuations in the material. We analyze this technique as a…
Inductance is a key parameter when optimizing the performance of superconducting quantum interference device (SQUID) magnetometers made from the high temperature superconductor YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) because lower SQUID inductance…
The discovery of two-dimensional superconductivity in LaAlO3/KTaO3 (111) and (110) interfaces has raised significant interest in this system. In this manuscript we report the first successful fabrication of a superconducting quantum…
We present the fabrication and electrical transport characterization of underdoped YBa$_2$Cu$_3$O$_{7-{\delta}}$ nanowires. The nanowires have been realized without any protective capping layer and they show transport properties similar to…
We studied the low-energy states of spin-1/2 quantum dots defined in InAs/InP nanowires and coupled to aluminium superconducting leads. By varying the superconducting gap, \Delta, with a magnetic field, B, we investigated the transition…
A superconducting quantum magnetometer based on magnetic flux-driven modulation of the density of states of a proximized metallic nanowire is theoretically analyzed. With optimized geometrical and material parameters transfer functions up…
We have designed low noise temperature sensing and control units with the objective of using them for the fabrication of far infrared active cavity radiometers. The sensing unit, first characterized at 300K using industrial platinium…
We have investigated asymmetrically shunted Nb/Al-AlO$_x$/Nb direct current (dc) superconducting quantum interference devices (SQUIDs). While keeping the total resistance $R$ identical to a comparable symmetric SQUID with $R^{-1} = R_1^{-1}…
We have studied a Superconducting Quantum Interference SQUID device made from a single layer thin film of superconducting silicon. The superconducting layer is obtained by heavily doping a silicon wafer with boron atoms using the Gas…
Superconducting QUantum-Interference Devices (SQUIDs) make magnetic resonance imaging (MRI) possible in ultra-low microtesla-range magnetic fields. In this work, we investigate the design parameters affecting the signal and noise…
Miniaturization of superconducting quantum interference devices (SQUIDs) is of major importance for the development of sensitive scanning nanoscale magnetometry tools. The high sensitivity of nanoSQUIDs is restricted, however, to only…
We characterize inductors fabricated from ultra-thin, approximately 100 nm wide strips of niobium (Nb) and niobium nitride (NbN). These nanowires have a large kinetic inductance in the superconducting state. The kinetic inductance scales…
In this letter, we demonstrate for the first time the creation of Josephson-like superconducting nanojunctions using a thermal scanning probe to directly inscribe weak links into microstrips of YBa2Cu3O7-x (YBCO). Our method effectively…
We have fabricated ultra-thin YBa2Cu3O7-x nanowires with a high critical current density and studied their voltage switching behavior in the 4.2 - 90 K temperature range. A comparison of our experimental data with theoretical models…
Modern Superconducting QUantum Interference Devices (SQUIDs) are commonly fabricated from either Al or Nb electrodes, with an in-situ oxidation process to create a weak link between them. However, common problems of such planar nano- and…