Related papers: Self-propagating high-temperature synthesis of bor…
Uranium borides are promising candidate fuel forms for use in advanced nuclear reactors due to their high thermal conductivity and potential for dual use as both fuel and burnable absorber materials. In this work, uranium tetraboride…
Hexagonal boron nitride (hBN) and black phosphorus (bP) are crystalline materials that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of the thermal…
Recently, several research groups announced reaching the point of metallization of hydrogen above 400 GPa. Following the mainstream of extensive investigations of compressed polyhydrides, in this work we demonstrate that small (4 atom %)…
PbFe12O19 (PFO) powders in hexagonal structure have been synthesized by sol-gel process using lead acetate, glycerin and ferric acetylacetonate as the precursor. PbFe12O19 ceramics were obtained by sintering the PbFe12O19 powders at…
Superconductivity intrinsic to the intercalated black phosphorus (BP) with a transition temperature Tc of 3.8 K, independent of the intercalant, whether an alkali or an alkaline earth element, has been reported recently by R. Zhang et al.…
Recent reported very high thermal conductivities in the cubic boron arsenide (BAs) and boron phosphide (BP) crystals could potentially provide a revolutionary solution in the thermal management of high power density devices. To fully…
The tetragonal Mo$_5$PB$_2$ compound was recently reported to show superconductivity with a critical temperature up to 9.2 K. In search of evidence for multiple superconducting gaps in Mo$_5$PB$_2$, comprehensive measurements, including…
Lead iron niobate (PbFe0.5Nb0.5O3 - PFN) thin films were synthesized by a modified sol-gel route, which offers the advantage of a rapid, simple and non-toxic reaction method. Polycrystalline perovskite-structured PFN thin films without…
We present a new method to synthesize bulk indium nitride by means of a simple solid-state chemical reaction carried out under hydrostatic high pressure/high temperature conditions in a multi-anvil apparatus, not involving gases or solvents…
A 3 nm coronene coating and a 4 nm amorphous carbon coating with uniform shell-core encapsulation structure for nanosized boron (B) powders are formed by a simple process, where coronene is directly mixing with boron particles without a…
We have investigated the thermodynamic and kinetic barriers involved in the synthesis of MgB2 films. This work refines our initial conjectures predicting optimal MgB2 thin film growth conditions as a consequence of the unusually large…
We have synthesized bulk Mg(B$_{1-x}$C$_x$)$_2$ from a mixture of elemental Mg, B, and the binary compound B$_4$C. Carbon incorporation was dramatically improved by a two step reaction process at an elevated temperature of 1200 $^o$C. This…
New boron subnitride B50N2 has been synthesized by crystallization from the B-BN melt at 5 GPa, and its structure has been refined using Rietveld analysis. B50N2 crystallizes in the tetragonal space group P-4n2 with unit cell parameters a =…
The use of solid boron hydride molecules as a fuel for proton-boron fusion was proposed by M. Kr\r{u}s and M. Londesborough at "Interaction of Inorganic Clusters, Cages, and Containers with Light" workshop in November 2021. Here we…
Superconductivity in two-dimensional compounds is widely concerned, not only due to its application in constructing nano-superconducting devices, but also for the general scientific interests. Very recently, borophene (two-dimensional boron…
The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction…
The mechanisms of fast low-temperature Spark Plasma Sintering (SPS) of W + 10% wt. Ni powders were investigated. The powder compositions were obtained in two methods: (i) by mixing W and Ni powders in a specified ratio (hereinafter referred…
Melting of orthorhombic boron silicide B6Si has been studied at pressures up to 8 GPa using in situ electrical resistivity measurements and quenching. It has been found that in the 2.6-7.7 GPa range B6Si melts congruently, and the melting…
The role of carbon in the formation of alpha boron at high pressure and high temperature (HPHT) has been investigated by combining HPHT experiments and density functional theory (DFT) calculations. Starting from beta rhombohedral or…
For production of low temperature plasmas with low collisionality, 2.45GHz microwave power up to 20kW is injected perpendicularly to the toroidal field at very low toroidal field Bt