Related papers: Multiple phases in sputtered Cr2CoGa films
Molybdenum oxide films offer a rich variety of properties for diverse applications, but exclusive synthesis of desired phases is a major challenge. Here, we demonstrate that oxygen flow ratio fO2 = [O2]/[Ar+O2] is crucial not only for phase…
KCrF3 represents another prototypical orbital-ordered perovskite, where Cr2+ possesses the same electronic configuration of 3d4 as that of strongly Jahn-Teller distorted Mn3+ in many CMR manganites. The crystal and magnetic structures of…
A detailed study of the precipitation of the \gamma' (AlAg2) phase in undeformed aluminium-silver alloys has been conducted. Several previously unreported features were observed, including the formation of discrete three-dimensional…
A dense phase of a post-layered perovskite Sr3Co2O6 was created by a high-pressure and high-temperature synthetic route and quenched to ambient conditions. The structure of Sr3Co2O6 was determined by synchrotron X-ray powder diffraction.…
Using magnetron sputtering, a spatial composition spread approach was applied successfully to obtain 48-member libraries of the Bi2Sr2YxCa1-xCu2Oy (0.5<= x <=1)cuprate superconducting system. The libraries of each system were deposited onto…
We report the synthesis of Co2FeGa/SiO2 nanoparticles by sol-gel method and characterization using x-ray diffraction (XRD), transmission electron microscopy (TEM) and magnetic measurements. The Rietveld refinements of XRD data with space…
Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), scanning electron…
The formation of energetically favourable and metastable mineral phases within the Fe-H2O system controls the long-term mobility of iron complexes as well as other aqueous phase constituents in natural aquifers, soils and other…
MSr2Y1.5Ce0.5Cu2Oz (M-1222) compounds, with M = Fe and Co, have been synthesized through a solid-state reaction route. Both compounds crystallize in a tetragonal structure (space group I4/mmm). A Rietveld structural refinement of…
Copper ferrite thin films were deposited on amorphous quartz substrates. The as deposited films were annealed in air and either quenched or slow cooled. Magnetization studies were carried out on the as deposited as well as annealed films…
The atomic structure and composition of non-interfacial ITO and ITO-Si interfaces were studied with Transmission Electron Microscopy (TEM) and X-ray Photoelectron Spectroscopy (XPS). The films were deposited by DC magnetron sputtering on…
Chemically _ driven isothermal close space vapour transport was used to prepare pure MoO2 films which were eventually converted to MoO3 by annealing in air. According to temperature_dependent Raman measurements, the MoO2/MoO3 phase…
Bulk magnetodielectric composites with a 3/0 configuration comprising of ferroelectric/magnetostrictive phases have been synthesized using Sr0.5Ba0.5NbO6 / CoCr0.4Fe1.6O4 as the two constituents respectively. The ferroelectric phase made by…
Various MSr2YCu2Oz (M1212 with M = Fe, Co, Al and Ga) compounds have been synthesized through a solid state reaction route. All these compounds are derived from the basic CuBa2YCu2O7 structure. Rietveld structural refinement of the…
Sr2Cr3As2O2 is composed of alternating square-lattice CrO2 and Cr2As2 stacking layers, where CrO2 is isostructural to the CuO2 building-block of cuprate high-Tc superconductors and Cr2As2 to Fe2As2 of Fe-based superconductors. Current…
Here we report on the structural, optical, electrical and magnetic properties of Co-doped and (Co,Mo)-codoped SnO2 thin films deposited on r-cut sapphire substrates by pulsed laser deposition. Substrate temperature during deposition was…
Photothermal (photonic) sintering crystallizes as-deposited amorphous LiCoO2 (LCO) cathodes for solid-state thin-film batteries using millisecond, surface-localized heating. However, process design often relies on 1D models with…
Precipitation of the \gamma' (AlAg2) phase was investigated in Al-Ag(-Cu) alloys using high resolution transmission electron microscopy and scanning transmission electron microscopy. Precipitation commenced with segregation of silver to…
An attempt is made here to revisit structure formation in a proto-stellar cloud during the early phase of evolution. Molecular cloud subjected to a set of various initial conditions in terms of initial temperature and amplitude of azimuthal…
The morphology of epitaxial structures formed in solidification of liquid Au films on the Au(110) surface was studied by molecular dynamics simulation based on a many--body interatomic potential. The (1x2) reconstructed and smooth phase at…