Related papers: Foil Diffuser Investigation with GEANT4
This paper addresses the structural characterisation of a series of U/Fe, U/Co and U/Gd multilayers. X-ray reflectivity has been employed to investigate the layer thickness and roughness parameters along the growth direction and high-angle…
In recent years, the issue of radon emanation and diffusion has become a critical concern for rare decay experiments, such as JUNO and PandaX-4T. This paper introduces a detector design featuring a symmetric radon detector cavity for the…
We are designing an all-scintillator Compton gamma imager for use in security investigations and remediation actions involving radioactive threat material. To satisfy requirements for a rugged and portable instrument, we have chosen solid…
Plasma-facing materials (PFMs) represent one of the most significant challenges for the design of future nuclear fusion reactors. Inside the reactor, the divertor will experience the harshest material environment: intense bombardment of…
This paper deals with the comparison between thermal and Fission Enhanced Diffusion (FED) of uranium into zirconia, representative of the inner face of cladding tubes. The experiments under irradiation are performed at the Institut Laue…
During operation, the radio-frequency quadrupole (RFQ) of the LINAC4 at CERN is exposed to high electric fields, which can lead to vacuum breakdown. It is also subject to beam loss, which can cause surface modification, including…
If an ultrarelativistic charged particle channels inside a single crystal with periodically bent crystallographic planes, it emits hard electromagnetic radiation of the undulator type. Due to similarity of its physical principles to the…
Usually, Monte Carlo models are validated against experimental data. However, models of multiple Coulomb scattering (MCS) in the Gaussian approximation are exceptional in that we have theories which are probably more accurate than the…
A prototype for a sampling calorimeter made out of cerium fluoride crystals interleaved with tungsten plates, and read out by wavelength-shifting fibres, has been exposed to beams of electrons with energies between 20 and 150 GeV, produced…
This paper proposes an experiment to easily detect radiative heat transfer in the microwave range. Following an idea given by Pendry more than a decade ago [1], we show that a 3D array of tungsten 2micron radius wires with a 1 cm period…
Neutron shielding simulations by using GEANT4 and PHITS code are performed. As a neutron source, $^{252}$Cf is considered and the energy distribution of the neutrons emitted from $^{252}$Cf is assumed the Watt fission spectrum. The neutron…
We develop a dynamical effective medium theory to accurately predict the unusual properties of elastic metamaterials in two dimensions near the resonant frequencies. The theory shows that the effective bulk modulus, shear modulus, and mass…
The results of computer simulation of the high-energy electrons passage through thin layers of titanium (Ti) and polyimide Kapton$^\circledR$ in the energy range from 3 to 20 MeV are presented. Simulation is carried out using the Geant4…
In this work GEM and single-hole Thick GEM structures, composed of different coating materials, are studied. The used foils incorporate conductive layers made of copper, aluminium, molybdenum, stainless steel, tungsten and tantalum. The…
An electron beam may be used to generate bremsstrahlung photons that go on to create photoneutrons within metals. This serves as a low-energy neutron source for irradiation experiments [1-3]. In this article, we present simulation results…
The possible use of open-cell metal foams for particle accelerator beam liners is considered. Available materials and modeling tools are reviewed, potential pros and cons are pointed out, and a study program is outlined.
We present a geometry class for efficiently simulating particle transport through aerosols in GEANT4. It is demonstrated that aerosol granularity can strongly affect this transport and thus a generic aerosol model must respect this…
In this work, we investigate the response of epsilon-near-zero (ENZ) metamaterials and plasmonic materials to electromagnetic source excitation. The use of these media for tailoring the phase of radiation pattern of arbitrary sources is…
We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements,…
Through passively emitting excess heat to the outer space, radiative cooling has been demonstrated as an efficient way for energy saving applications. Selective surface with unity emittance only within the atmospheric window as well as zero…