Related papers: Vacuum nanogap formation in multilayer structures …
We propose and demonstrate a method for the construction of highly uniform, multilayered, orientation-controlled superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using bi-phase liquid interface. These atomically-flat…
Nanofabrication is an integral part of realization of advanced functional devices ranging from optical displays to memory devices. Focused ion beam (FIB) milling is one of the widely used nanofabrication methods. Conventionally, FIB milling…
Large-area transmission dynodes were fabricated by depositing an ultra-thin continuous film on a silicon wafer with a 3-dimensional pattern. After removing the silicon, a corrugated membrane with enhanced mechanical properties was formed.…
In this study we report on the film growth and characterization of thin (approximately 50 nm thick) Ti-Fe-C films deposited on amorphous quartz. The experimental studies have been complemented by first principles density functional theory…
We demonstrate the fabrication of graphene nanogap with crystallographically matching edges on SiO2Si substrates by divulsion. The current-voltage measurement is then performed in a high-vacuum chamber for a graphene nanogap with few…
The electronic structure of nanocrystalline (nc-) TiC/amorphous C nanocomposites has been investigated by soft x-ray absorption and emission spectroscopy. The measured spectra at the Ti 2p and C 1s thresholds of the nanocomposites are…
The miniaturization of electronic devices brings severe challenges in the deposition of metal interconnects in back end of line processing due to a continually decreasing volume available for metal deposition in the interconnect via. Cu is…
The electronic structures of epitaxially grown films of Ti3AlC2, Ti3SiC2 and Ti3GeC2 have been investigated by bulk-sensitive soft X-ray emission spectroscopy. The measured high-resolution Ti L, C K, Al L, Si L and Ge M emission spectra are…
Several active areas of research in novel energy storage technologies, including three-dimensional solid state batteries and passivation coatings for reactive battery electrode components, require conformal solid state electrolytes. We…
We report a method for fabricating nanogaps directly with electron beam lithography (EBL). The primary resolution-limit of EBL, electron back-scattering, is reduced dramatically by using a thin-film as a substrate. We show that this…
A simple and highly reproducible technique is demonstrated for the fabrication of metallic electrodes with nanometer separation. Commercially available bare gold colloidal nanoparticles are first trapped between prefabricated…
Herein, titania thin films are fabricated by a facile liquid-phase method based on vacuum filtration of a colloidal suspension of titania nanosheets, which is followed by thermal annealing to transform the nanosheet film into anatase TiO2.…
The diffusive motion of metal nanoparticles Au and Ag on monolayer and between bilayer heterostructures of transition metal dichalcogenides and graphene are investigated in the framework of density functional theory. We found that the…
In order to get homogeneous nanostructured Aluminum Nitride deposits, thin films were grown at room temperature on [001] Si substrates by radio frequency magnetron reactive sputtering. The deposits were analysed by Transmission Electron…
Microstructure changes during annealing of nano-crystalline silver and amorphous silicon multilayers (Ag/a-Si) have been studied by X-ray diffraction and transmission electron microscopy. The dc-magnetron sputtered Ag/a-Si multilayers…
Mercury-Sensitized Photo-Assisted Chemical Vapor Deposition (Hg-Photo-CVD) technique opens new possibilities for reducing thin film growth temperature and producing novel semiconductor materials suitable for the future generation of high…
Designing molecular organic semiconductors with distinct frontier orbitals is key for the development of devices with desirable properties. Generating defined organic nanostructures with atomic precision can be accomplished by on-surface…
We investigate Ag(100) thin films epitaxially grown on a Fe(100) substrate using a low-temperature scanning tunneling microscope. Fabrication of a wedge structure by evaporating Ag through a shadow mask allows us to observe systematic…
Thin-film solid-state metal dealloying (thin-film SSMD) is a promising method for fabricating nanostructures with controlled morphology and efficiency, offering advantages over conventional bulk materials processing methods for integration…
Assembling nanostructured building blocks into network materials unlocks macroscopic properties inaccessible with monolithic solids, notably toughness and tolerance to electrochemical alloying. A method is reported for large-scale,…