Related papers: MicroSQUIDs based on V/Cu/V Josephson nanojunction…
Noise from material defects at device interfaces is known to limit the coherence of superconducting circuits, yet our understanding of the defect origins and noise mechanisms remains incomplete. Here we investigate the temperature and…
We have fabricated arrays of High-T$_c$ Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive antennas for Radio-Frequency (RF) waves. These sub-wavelength size devices known as…
We report on the fabrication and characterization of nanopatterned dc SQUIDs with grain boundary Josephson junctions based on heteroepitaxially grown YBa$_2$Cu$_3$O$_7$ (YBCO)/ SiTrO$_3$ (STO) superlattices on STO bicrystal substrates.…
We present a fabrication method of superconducting quantum interference devices (SQUIDs) based on direct write lithography with an Atomic Force Microscope (AFM). This technique involves maskless local anodization of Nb or NbN ultrathin…
A new DC-SQUID is proposed that exploits the properties of the grain boundary junctions in high T_c superconductors. The orientations of the grain boundaries are chosen in such a way to establish a pi/2 (rather than 0 or pi) phase…
The development of nonlinear and frequency-tunable superconducting microwave circuits for operation in large magnetic fields is of high relevance for hybrid quantum systems such as spin resonance spectrometers, microwave quantum magnonics,…
We investigate proximity induced superconductivity in micrometer-long bismuth nanowires con- nected to superconducting electrodes with a high critical field. At low temperature we measure a supercurrent that persists in magnetic fields as…
DC superconducting quantum interference devices (dc-SQUIDs) were fabricated in Co-doped BaFe2As2 epitaxial films on (La, Sr)(Al, Ta)O3 bicrystal substrates with 30deg misorientation angles. The 18 x 8 micro-meter^2 SQUID loop with an…
We present experimental results on a Josephson parametric amplifier tailored for readout of ultra-sensitive thermal microwave detectors. In particular, we discuss the impact of fabrication details on the performance. We show that the small…
A superconducting magnetometers based on the magnetic field dependence of the Eck step voltage in long Josephson tunnel junctions (LJTJs) is demonstrated. The field to be measured is applied perpendicular to a continuous superconducting…
We have developed a nuclear magnetic resonance spectrometer with a series tuned input circuit for measurements on samples at millikelvin temperatures based on an integrated two-stage superconducting quantum interference device current…
We measured the microwave response of a HgTe quantum well Josephson junction embedded into an RF SQUID loop which is inductively coupled to a superconducting resonator. The side-contacted devices studied here operate in bulk transport mode,…
We use low-temperature scanning electron microscopy combined with SQUID detection of magnetic flux to image vortices and to investigate low-frequency flux noise in YBa$_2$Cu$_3$O$_7$ thin film SQUIDs. The low-frequency flux noise shows a…
A numerical model based on a lumped circuit element approximation for a bi-superconducting quantum interference device (bi-SQUID) operating in the presence of an external magnetic field is presented in this paper. Included in the model is…
This work presents the study of some new anomalous electromagnetic effects in graphite-like thin carbon films. These are: The fast switching (1nanosecond) of electrical conductivity The detection of microwave radiation and its temperature…
We have developed a novel dc SQUID system with a micro-coil input circuit to act as a local probe of quantum matter and nanosystems. The planar niobium micro-coil pickup loop is located remotely from the SQUID, coupled through a…
We present measurements of 1/f frequency noise in both linear and Josephson-junction-embedded superconducting aluminum resonators in the low power, low temperature regime - typical operating conditions for superconducting qubits. The…
We present the results of an industry-grade fabrication of superconducting qubits on 200 mm wafers utilizing CMOS-established processing methods. By automated waferprober resistance measurements at room temperature, we demonstrate a…
We present a fabrication scheme and testing results for epitaxial sub-micrometer Josephson junctions. The junctions are made using a high-temperature (1170 K) "via process" yielding junctions as small as 0.8 mu m in diameter by use of…
We developed a scanning DC SQUID microscope with novel readout electronics capable of wideband sensing RF magnetic fields from 50 to 200 MHz and simultaneously providing closed-loop response at kHz frequencies. To overcome the 20 MHz…