Related papers: Sub micron-precision sample holder for accurate re…
We demonstrate a method to accurately control the distance between a custom probe and a sample on a {\mu}m to nm scale. The method relies on the closed-loop feedback on the angular deflection of an in-contact AFM microcantilever. High…
A scanning force microscope was implemented operating at temperatures below 4.2K and in magnetic fields up to 8T. Piezoelectric quartz tuning forks were employed for non optical tip-sample distance control in the dynamic operation mode.…
Micro scanning mirrors (MSM) extend the range and field of view of LiDARs, medical imaging devices, and laser projectors. However, a new class of soft-hinged MSMs contains out-of-plane translation in addition to the 2 degree-of-freedom…
Multi-tip scanning tunneling microscopy (STM) is a powerful method to perform charge transport measurements at the nanoscale. With four STM tips positioned on the surface of a sample, four-point resistance measurements can be performed in…
Forces acting between an Atomic Force Microscope (AFM) tip and sample are three dimensional. Despite this, most AFM force measurements are confined to one or two dimensions. Extending AFM force measurements into three dimensions has…
Atomic force microscopy (AFM) is an essential nanoinstrument technique for several applications such as cell biology and nanoelectronics metrology and inspection. The need for statistically significant sample sizes means that data…
Magnetic resonance force microscopy (MRFM) is a scanning probe technique capable of detecting MRI signals from nanoscale sample volumes, providing a paradigm-changing potential for structural biology and medical research. Thus far, however,…
Synchrosqueezing transform (SST) is a useful tool for vibration signal analysis due to its high time-frequency (TF) concentration and reconstruction properties. However, existing SST requires much processing time for large-scale data. In…
We use a cooled Scanning Probe Microscope (SPM) to electron motion in nanoscale devices. The charged tip of the SPM is raster scanned at a constant height above the surface as the conductance of the device is measured. The image charge…
Atomic Force Microscopy (AFM) allows to probe matter at atomic scale by measuring the perturbation of a nanomechanical oscillator induced by near-field interaction forces. The quest to improve sensitivity and resolution of AFM has forced…
In many problems, complex non-Gaussian and/or nonlinear models are required to accurately describe a physical system of interest. In such cases, Monte Carlo algorithms are remarkably flexible and extremely powerful approaches to solve such…
It is well known that the registration process is a key step for super-resolution reconstruction. In this work, we propose to use a piezoelectric system that is easily adaptable on all microscopes and telescopes for controlling accurately…
A cooled scanning probe microscope (SPM) has been used to image cyclotron orbits of electrons through high-mobility graphene in a magnetic field.1-5 In a hBN-graphene-hBN device patterned into a hall bar geometry, the magnetic field focuses…
As mechanical devices in the nano/micro length scale are increasingly employed, it is crucial to understand nanoscale friction and wear especially at technically relevant sliding velocities. Accordingly, a novel technique has been developed…
Piezoresponse Force Microscopy (PFM) is one of the most widespread methods for investigating and visualizing ferroelectric domain structures down to the nanometer length scale. PFM makes use of the direct coupling of the piezoelectric…
We demonstrate thermally limited force spectroscopy using a probe formed by a dielectric microsphere optically trapped in water near a dielectric surface. We achieve force resolution below 1 fN in 100 s, corresponding to a 2 {\AA} rms…
Acoustical tweezers open major prospects in microbiology for cells and microorganisms contactless manipulation, organization and mechanical properties testing since they are biocompatible, label-free and can exert forces several orders of…
Super-resolution microscopy normally requiring complex and cumbersome optics is not applicable for in situ imaging through a narrow channel. Here, we demonstrate single hair-thin multimode fiber (MMF) endoscope (less than 250 ${\mu}m$) for…
Scanning probe microscopy is often extended beyond topographic imaging to study electrical forces and sample properties, with the most widely used experiment being frequency-modulated Kelvin probe force microscopy. The equations commonly…
Magnetic force microscopy (MFM) is a well-established technique in scanning probe microscopy that allows for the imaging of magnetic samples with a spatial resolution of tens of nm and stray fields down to the mT range. The spatial…