Related papers: Thermally induced structural modification in the A…
Annealing of crystalline multilayers composed of two miscible elements usually causes interfacial mixing of the constituent atoms, possibly leading to the formation of binary alloys at the interfaces. Magnetron sputtered c-Ni/a-Zr…
The amorphous-to-crystalline transition in Al(1.0%wtSi)/Zr and Al(Pure)/Zr multilayers grown by direct-current magnetron sputtering system has been characterized over a range of Al layer thicknesses (1.0-5.0 nm) by using a series of…
The effects of thermal treatments on metallic glass nanolaminates (NLs), with a composition of Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ and a bilayer period of 50 nm, were explored to control their mechanical properties through…
Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range…
The investigation of devitrification in thermally annealed nanodimensional glassy alloy thin films provides a comprehensive understanding of their thermal stability, which can be used to explore potential applications. The amorphous to…
The intermetallic compound Zr3Al is severely deformed by the method of repeated cold rolling. By X-ray diffraction it is shown that this leads to amorphization. TEM investigations reveal that a homogeneously distributed debris of very small…
The influence of thermal processing on the potential energy, atomic structure, and mechanical properties of metallic glasses is examined using molecular dynamics simulations. We study the three-dimensional binary mixture, which was first…
A study is presented of the structural changes occurring as a function of the annealing conditions in hydrogenated amorphous Si/Ge multilayers prepared by sputtering. Annealing changes the structure of the as-deposited multilayer except for…
Thin film metallic glasses undergoing devitrification can form partially crystallized or fully crystallized materials with novel structural and magnetic properties. The development of desired and tunable properties of such systems drives…
The oxidation behavior of W-Zr thin-film metallic glasses (TFMGs) with 32, 48 and 61 at.% Zr, prepared by dc magnetron co-sputtering, was comprehensively studied after annealing in synthetic air. The study focuses on the effect of the…
Aluminosilicate (Al-Si-O) thin films containing up to 31 at. % Al and 23 at. % Si were prepared by reactive RF magnetron co-sputtering. Mechanical and structural properties were measured by indentation and specular reflectance infrared…
Under high pressure conditions, Zr undergoes a phase transformation from its ambient equilibrium hexagonal close packed $\alpha$ phase to hexagonal $\omega$ phase. Upon returning to ambient conditions, the material displays hysteretic…
We examine the atomic intermixing phenomenon in three distinct amorphous CoB-based multilayer thin film platforms - Pt/CoB/Ir, Ir/CoB/Pt and Pt/CoB/MgO - which are shown to stabilise room-temperature chiral magnetic textures. Intermixing…
The effect of composition on microstructure both at the length scale of the secondary dendrite arm spacing and nano-sized dispersoids during homogenization of Al-Zn-Cu-Mg-Zr alloys has been studied. A comprehensive model that can predict…
Nanocrystalline Cu-3 at.% Zr powders with ~20 nm average grain size were created with mechanical alloying and their thermal stability was studied from 550-950 {\deg}C. Annealing drove Zr segregation to the grain boundaries, which led to the…
The present study reports Al induced crystallization (AIC) of amorphous (a)-SiGe in Al-Ge-Si ternary system at low temperature ~ 350 degree C. In addition to crystallization, the isothermal annealing of a-SiGe/AlOx/Al/corning-glass (CG)…
We report annealing induced exchange bias in Fe-Cu-Pt based heterostructures with Cu as an intermediate layer (Fe/Cu/Pt heterostructure) and capping layer (Fe/Pt/Cu heterostructure). Exchange bias observed at room temperature (300 K) is…
La$_{0.67}$Sr$_{0.33}$Mn$_{1-x}$Ti$_x$O$_{3}$ ($0 \le x \le 0.20$) polycrystalline materials are prepared by employing lower annealing temperature compared to the temperatures reported for the materials of the same composition. The…
The mechanical behaviour and deformation mechanisms of magnetron-sputtered Zr/Nb nanoscale multilayers were analysed as a function of the periodicity (L = 10 and 75 nm) and annealing time at 350C (2-336 hrs). The strength of the…
Building on the recent discovery of tough nanocrystalline Cu-Zr alloys with amorphous intergranular films, this paper investigates ternary nanocrystalline Cu-Zr-Hf alloys with a focus on understanding how alloy composition affects the…