Related papers: HTS wiggler concept for a damping ring
The high-Tc superconducting (HTS) dynamo is a promising device that can inject large DC supercurrents into a closed superconducting circuit. This is particularly attractive to energise HTS coils in NMR/MRI magnets and superconducting…
Dielectric waveguide (DWG) interconnects frequently utilize multimode waveguides due to their low dispersion in the fundamental mode. However, these links are more vulnerable to cross-modal coupling that significantly impacts their overall…
The increase in the number of readout channels in new detectors, like the Micro Pattern Gas Detectors (MPGD), in the order of several millions, requires a large amount of electrical power to supply the front-end electronics, up to hundreds…
We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied…
The development of cryogenic technology and high temperature superconducting (HTS) materials has seen continued interest worldwide in the development of HTS machines since the late 1980s. In this paper, the authors present a conceptual…
A homogenization method to model a stack of second generation (2G) High Temperature Superconducting (HTS) tapes under AC applied transport current or magnetic field has been obtained. The idea is to find an anisotropic bulk equivalent for…
AC losses in a high temperature superconducting (HTS) insert coil for a 25-T cryogen-free superconducting magnet are numerically calculated during its energization, assuming slab approximation. The HTS insert coil consists of 68 single…
We evaluate the electron transmission through a dangling-bond wire on Si(100)-H (2x1). Finite wires are modelled by decoupling semi-infinite Si electrodes from the dangling-bond wire with passivating H atoms. The calculations are performed…
Based on the design requirements proposed by the Beijing On-Line Isotope Separation project (BISOL), four Sn$^{22+}$-based,81.25MHz continuous wave (CW) drift tube linac (DTL) cavities have been designed. These DTLs are capable of…
Thin-disk lasers (TDLs) have made spectacular progress in the last decades both in continuous-wave and ultrafast operation. Nowadays, single thin-disk oscillators with > 16 kW of continuous-wave (CW)-power have been demonstrated and…
ITER (International Thermonuclear Experimental Reactor) static magnetic field (SMF) test facility requires a DC power supply with low voltage, high current, and high stability. Due to the limitation ofswitching loss, there is a…
In a certain regime of low carrier densities and strong correlations, electrons can crystallize into a periodic arrangement of charge known as Wigner crystal. Such phases are particularly interesting in one dimension (1D) as they display a…
We study DC and AC transport in low-density $p-$Si/SiGe heterostructures at low temperatures and in a broad domain of magnetic fields up to 18 T. Complex AC conductance is determined from simultaneous measurement of velocity and attenuation…
Developing HTS dipole inserts producing fields larger than 5 T within 15 T Nb3Sn outserts is necessary to generate 20 T or higher fields for future high energy colliders. Dipole inserts based on the cos-theta coil geometry with various…
High-temperature technical superconductors are potential candidates for compact and high-field tokamak magnets. The demand for higher fusion power can be met with an on-axis high magnetic field due to toroidal magnets. An R&D activity has…
The optimization of a HTS cable design with respect to AC-losses is of crucial importance for the economic viability of the respective concept. However the experimental determination of AC-losses is not straightforward since for short cable…
The current designs of future electron-positron linear colliders incorporate large and complex damping rings to produce asymmetric beams for beamstrahlung suppression. Here we present the design of an electron injector capable of delivering…
We describe efficient four-coil inductive power transfer (IPT) systems that operate at 100 MHz. The magnetically-coupled transmitter and receiver were made from electrically-small and high-Q loop-gap resonators (LGRs). In contrast to the…
We study warm Higgs portal dark matter (DM) in the framework of freeze-in at stronger coupling. This scenario assumes that the Standard Model thermal bath temperature has always been relatively low, which suppresses dark matter production.…
A robust cryogenic infrastructure in form of a wired, thermally optimized dilution refrigerator is essential for present and future solid-state based quantum processors. Here, we engineer an extensible cryogenic setup, which minimizes…