Related papers: HTS wiggler concept for a damping ring
This paper reports a newly developed high current transformer-rectifier High-Tc Superconducting (HTS) flux pump switched by dynamic resistance. A quasi-persistent current of over 1.1 kA has been achieved at 77 K using the device, which is…
We demonstrate a geometrical effect on the depinning line (DL) of the flux line lattice of the Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+\delta}$ high-T$_c$ superconductor (HTSC) micrometer ring. The DL shifts to notably lower temperatures in…
The implementation of the 2nd generation high-Tc superconductors in power applications, such as electrical transformers, motors and generators requires superconducting wires that are superior to copper Litz wires at cryogenic temperatures…
We reveal obstacles related to the application of HTS cylinders in current limiting devices based on the superconducting - normal state transition. It is shown that, at the critical current density achieved presently in bulk materials, and…
Low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant…
This work explores power handling solutions for high-field, highly-radiative negative triangularity (NT) reactors based around the MANTA concept \cite{rutherford_manta_2024}. The divertor design is kept as simple as possible, opting for a…
MgB2 hollow wires have been produced with a new technique which uses a conventional wire manufacturing process but is applied to composite billets containing the elemental B and Mg precursors in an appropriate shape. The technique has been…
Nanomechanical resonators have demonstrated great potential for use as versatile tools in a number of emerging quantum technologies. For such applications, the performance of these systems is restricted by the decoherence of their fragile…
Designs of high-voltage (HV) systems for creating a drift electric field in liquid argon TPCs are reviewed. In ongoing experiments systems capable of approx. 100 kV are realised for a drift field of 0.5-1 kV/cm over a length of up to 1.5 m.…
We present the physical design and systematic optimization of a high-performance storage ring tailored for the generation of high-power coherent radiation, with particular emphasis on the extreme ultraviolet (EUV) regime. The proposed ring…
Reconfigurable magnetic tunnel diodes and transistors are a new concept in spintronics. The realization of such a device requires the use of materials with unique spin-dependent electronic properties such as half-metallic magnets (HMMs) and…
We developed a soft and high thermal conductive heat link for cryogenic applications. The measured maximum thermal conductivity was approximately 18500 W/m/K at 10 K. This spring constant was 1/43 of that of a single thick wire with the…
The prediction of ultra-low magnetic damping in Co 2 MnZ Heusler half-metal thin-film magnets is explored in this study and the damping response is shown to be linked to the underlying electronic properties. By substituting the Z elements…
As power grids experience increasing renewable penetration and rapid load growth from AI data centers and electrification, alleviating line congestion becomes critical to unlocking additional grid capacity. This work investigates Dynamic…
It is known that cuprate artificial high Tc superlattices (AHTS) with period d, composed of quantum wells confining interface space charge in stoichiometric Mott insulator layers (S), with thickness L, at the interface with overdoped normal…
Silicon trackers at the SLHC will suffer high radiation damage from particles produced during the collisions, which leads to high leakage currents. Reducing these currents in the sensors requires efficient cooling to -30 C. The large heat…
A 3.2 MeV injector has been designed and built for the Darht II Project at Los Alamos Lab. The installation of the complete injector system is nearing completion at this time. The requirements for the injector are to produce a 3.2 MeV, 2000…
The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is…
A 33.6 ps LSB Time-to-Digital converter was designed in 130 nm BiCMOS technology. The core of the converter is a differential 9-stage ring oscillator, based on a multi-path architecture. A novel version of this design is proposed, along…
One of the main challenges of the lattice design of synchrotrons, used as light sources or damping rings (DRs), is the minimization of the emittance. The optimal lattice configurations for achieving the absolute minimum emittance are the…