Related papers: Buried heterostructure vertical-cavity surface-emi…
A few-micron thick structure that shows nearly 100% resonant polarized absorptance at a predefined midinfrared wavelength is designed and simulated. Like resonant-cavity enhanced photodetector structure, it contains a thin absorber enclosed…
Recent advances in topological one-dimensional photonic crystal concepts have enabled the development of robust light-emitting devices by incorporating a topological interface state (TIS) at the cavity center. In this study, we…
We suggest to use InAs/GaSb coupled quantum wells for THz lasing. In these heterostructures THz lasing is based not on intersubband but on interband transitions. Crucial advantages of this design in comparison with intersubband lasers are…
The quality factor (Q), mode volume (Veff), and room-temperature lasing threshold of microdisk cavities with embedded quantum dots (QDs) are investigated. Finite element method simulations of standing wave modes within the microdisk reveal…
Cuboid-shaped organic microcavities containing a pyrromethene laser dye and supported upon a photonic crystal have been investigated as an approach to reducing the lasing threshold of the cavities. Multiphoton lithography facilitated…
Precision applications including quantum computing and sensing, mmWave/RF generation, and metrology, demand widely tunable, ultra-low phase noise lasers. Today, these experiments employ table-scale systems with bulk-optics and isolators to…
We demonstrate topological defect lasers in a GaAs membrane with embedded InAs quantum dots. By introducing a disclination to a square-lattice of elliptical air holes, we obtain spatially confined optical resonances with high quality…
Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and…
We at RRCAT have recently developed high power laser diodes in the wavelength range of 740 to 1000 nm. A typical semiconductor laser structure is consisted of about 10 epilayers with different composition, thickness and doping values. For…
Optical embedded eigenstates are localized modes of an open structure that are compatible to radiation yet they have infinite lifetime and diverging quality factors. Their realization in nanostructures finite in all dimensions is inherently…
Thick, high-purity semi-insulating (SI)homoepitaxial layers on Si-face 4H-SiC weregrownsystematically, with resistivity \geq 109{\Omega}-cmby maintaining high C/Si ratios 1.3-15 during growth.Comparison of secondary ion mass spectra…
A new scheme of a highly efficient hybrid laser cavity is proposed and experimentally demonstrated utilizing a hot cesium (Cs) vapor cell as an optical gain medium. The laser cavity consists of a macroscopic concave reflecting mirror (>99%…
Laser cutting of semiconductor wafers and transparent dielectrics has become a dominant process in manufacturing industries, encompassing a wide range of applications from flat display panels to microelectronic chips. Limited by the…
We demonstrate photonic crystal L3 cavities with resonant wavelength around 1.078 \textmu m on undoped silicon-on-insulator, designed to enhance spontaneous emission from phosphorus donor-bound excitons.\enspace We have optimised a…
We have demonstrated an ultrahigh-Q whispering-gallery-mode (WGM) microsphere laser based on the evanescent-wave-coupled gain. Dye molecules outside the sphere near the equator were excited, resulting in WGM lasing in the lowest radial mode…
We report the fabrication of a 1.2 cm long cavity directly on a nanofiber using femtosecond laser ablation. The cavity modes with finesse value in the range 200-400 can still maintain the transmission between 40-60%, which can enable…
High-quality planar cavities with low-absorption mirrors based on $Al_{0.2}Ga_{0.8}As/Al_{0.9}Ga_{0.1}As$ layers demonstrate continuous wave lasing at a wavelength of 956 nm. At 300 K, the threshold power density and quality-factor at the…
We explore the stability of a high-finesse optical cavity at 493 nm in vacuum for cavity QED with Barium ions. A high-finesse Fabry-Perot cavity is built using mirrors with high-reflectivity (HR) coatings that are implemented by stacking…
Radiation from an ultra-stable 240 GHz solid-state source has been injected, through an isolator, into the cavity of the University of California Santa Barbara (UCSB) MM-wave free-electron laser (FEL). High-power FEL emission, normally…
The aim of this paper is to study the squeezing and statistical properties of the light produced by a degenerate three-level laser whose cavity contains a degenerate parametric amplifier. In this quantum optical system the top and bottom…