Related papers: Enhanced Resolution of Poly-(Methyl Methacrylate) …
Microelectromechanical systems (MEMS) technologies are developing rapidly with increasing study of the design, fabrication and commercialization of microscale systems and devices. Accurate knowledge on the mechanical behaviors of thin film…
For a comprehensive characterization of mechanical reliability of metallization layers on polymer substrates both electrical and mechanical degradation should be taken into account. Although it is evident that cracking of a conductive film…
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which…
Metal oxide resists (MORs) have shown great promise for high resolution patterning in extreme ultraviolet (EUV) lithography, with potential for integration into high volume manufacturing. However, MORs have recently been shown to exhibit…
We present room temperature ferromagnetic resonance (FMR) studies of polycrystalline ||Pt/10 nm Cu/t Co/10 nm Cu/Pt|| films as a function of Co layer thickness (1 < t < 10 nm) grown by evaporation and magnetron sputtering. FMR was studied…
The ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates make \b{eta}-Ga2O3 promising for applications of next-generation power electronics while its thermal conductivity is at least one order of magnitude…
We report on the epitaxial growth and the characterization of thin FePt films and the subsequent patterning of magnetic lattice structures. These structures can be used to trap ultracold atoms for quantum simulation experiments. We use…
Metal-halide perovskites (MHPs) have exciting optoelectronic properties and are under investigation for various applications, such as photovoltaics, light-emitting diodes, and lasers. An essential step towards exploiting the full potential…
Metasurfaces are artificial thin materials that achieve optical thickness through thin geometrical structure. This feature of metasurfaces results in unprecedented benefits for enhancing the performance of optoelectronic devices. In this…
We use a homogenization procedure for Maxwell's equations in order to obtain in the local limit the frequency ($\omega$) dependent macroscopic dielectric response $\epsilon^M(\omega)$ of metamaterials made of natural constituents with any…
The Thermal Boundary Resistance at the interface between a nanosized Al film and an Al_{2}O_{3} substrate is investigated at an atomistic level. A room temperature value of 1.4 m^{2}K/GW is found. The thermal dynamics occurring in…
The dc response of an electrochemical thin film, such as the separator in a micro-battery, is analyzed by solving the Poisson-Nernst-Planck equations, subject to boundary conditions appropriate for an electrolytic/galvanic cell. The model…
Synchrotron x-ray powder diffraction measurements have been performed on unpoled ceramic samples of (1-x)PbMg(1/3)Nb(2/3)O3-xPbTiO3 (PMN-xPT) with 30%<= x<= 39% as a function of temperature around the morphotropic phase boundary (MPB),…
Antiferromagnetic Mn$_{3}$Ge with a non-collinear Kagome structures present exciting prospects for exploring Berry curvature driven anomalous Hall effects (AHE). Despite substantial progress in bulk systems, the synthesis of crystalline…
Transmission electron beams (TEBs) have long been used to study and manipulate materials at nanometer scales. In the late 1970's, Cherns demonstrated surface pitting in Au films upon exposure to a 1MeV TEB and observed crystal dislocations…
This work aims to present the current state of simulations of electroluminescence (EL) produced in gas-based detectors with special interest for NEXT --- Neutrino Experiment with a Xenon TPC. NEXT is a neutrinoless double beta decay…
Finite size effects in ferroelectric thin films have been probed in a series of epitaxial perovskite c-axis oriented PbTiO3 films grown on thin La0.67Sr0.33MnO3 epitaxial electrodes. The film thickness ranges from 480 down to 28 A (7 unit…
Phononic silicon structures have emerged as an integrable and scalable nanosystem for tailoring thermal transport. However, their widespread adoption has been limited by their complex fabrication pathways. Alongside, the reliable…
Hydrodynamic pattern formation (PF) and dewetting resulting from pulsed laser induced melting of nanoscopic metal films have been used to create spatially ordered metal nanoparticle arrays with monomodal size distribution on…
Chromium selenide thin films were grown epitaxially on Al${_2}$O${_3}$(0001) and Si(111)-(7${\times}$7) substrates using molecular beam epitaxy (MBE). Sharp streaks in reflection high-energy electron diffraction and triangular structures in…