Related papers: Silver segregation to \theta' (Al2Cu)-Al interface…
Precipitate strengthening of light metals underpins a large segment of industry.Yet, quantitative understanding of physics involved in precipitate formation is often lacking, especially, about interfacial contribution to the energetics of…
T-(Al20Cu2Mn3) phase dispersoids are important for limiting recovery and controlling grain growth in Al-Cu alloys. However, these dispersoids can also reduce precipitation hardening by acting as heterogeneous nucleation sites and may lead…
The deformation behaviour of the intermetallic Al$_{2}$Cu-phase was investigated using atomistic simulations and micropillar compression, where slip on the unexpected {211} and {022} slip planes was revealed. Additionally, all possible slip…
We characterise the influence of the segregation behaviours of two typical alloying elements, aluminium and nickel, on the interfacial cohesive properties of copper-rich precipitates in ferritic steels, with a view towards understanding…
The present work investigates the atomic interactions among Cu, Al, and Ni elements in bcc-iron matrix, focusing on the formation mechanism of nano-sized core-shell Cu precipitates. Using a combination of atom probe tomography (APT),…
Atomistic simulations were carried out to analyze the interaction between $< a>$ basal dislocations and precipitates in Mg-Al alloys and the associated strengthening mechanisms.
In this study, the role of elastic and interfacial energies in the shape evolution of T1 precipitates in Al-Cu-Li alloys is investigated using phase-field modeling. We employ a formulation considering the stoichiometric nature of the…
One usual way to strengthen a metal is to add alloying elements and to control the size and the density of the precipitates obtained. However, precipitation in multicomponent alloys can take complex pathways depending on the relative…
We apply a combinatorial approach to study the influence of Mg concentration on the precipitation kinetics in an Al-Cu-Li alloy using a diffusion couple made by linear friction welding. The precipitation kinetics is monitored in the…
The microstructure of the commercial alloy AA2195 was investigated on the nano-scale after conducting a T8 tempering. This particular thermo-mechanical treatment of the specimen resulted in the formation of platelet-shaped $T_{1}$…
The early stage of the chromium precipitation in copper was analyzed at the atomic scale by Atom Probe Tomography (APT). Quantitative data about the precipitate size, 3D shape, density, composition and volume fraction were obtained in a…
Increasing attention is being paid to $\alpha$$_2$ Ti$_3$(Al,Sn) precipitation from the $\alpha$ phase of titanium alloys owing to its effect on slip band formation, localisation and the implications for fatigue performance in jet engine…
Cobalt-based alloys with {\gamma}/{\gamma}' microstructures have the potential to become the next generation of superalloys, but alloy compositions and processing steps must be optimized to improve coarsening, creep, and rafting behavior.…
In this work electron backscattered diffraction (EBSD)-assisted slip trace analysis and transmission electron microscopy have been utilized to investigate the interaction of basal dislocations with precipitates in the Mg alloys…
The Fe-Cu system has attracted much attention over the last several decades due to its technological importance as a model alloy for Cu steels. In spite of these efforts several aspects of its phase diagram remain unexplained. Here we use…
We report evidence of Re and Mo segregation (up to 2.6 at.% and 1 at.%) along with Cr and Co to the dislocations inside of {\gamma}' precipitates in a second generation Ni-based single crystal superalloy, after creep deformation at…
We examine precipitate-induced dynamic strain aging in precipitation-hardened Al-Cu alloys by combining atomistic simulations, kinetic Monte Carlo, and analytical rate theory. Atomistic simulations were used to characterize (1) the…
The formation of interface dipoles in self-assembled monolayers (SAMs) of --CH$_3$ and --CF$_3$ terminated short-chain alkanethiolates on Ag(111) is studied by means of density functional theory calculations. The interface dipoles are…
Nucleation and growth of Ti$_3$Al \textalpha{}$_2$ ordered domains in \textalpha{}-Ti--Al--X alloys were characterised using a combination of transmission electron microscopy, atom probe tomography and small angle X-ray scattering. Model…
Platelet array linear complexions have been predicted in Al-Cu, with notable features being dislocation faceting and climb into the precipitate, both of which should impact plasticity. In this study, we examine the strain rate dependence of…