Related papers: Feedback-controlled laser fabrication of micromirr…
Spin-controlled lasers are highly interesting photonic devices and have been shown to provide ultra-fast polarization dynamics in excess of 200 GHz. In contrast to conventional semiconductor lasers their temporal properties are not limited…
Repetition-rate-scanned lasers are practical in accordion frequency comb generation that serves as a variable gearbox connecting optical and radio wave domains. Rapid and wide-range scanned repetition rate can benefit versatile purposes,…
We used two novel approaches to produce sub-wavelength structure (SWS) anti-reflection coatings (ARC) on silicon for the millimeter and sub-millimeter (MSM) wave band: picosecond laser ablation and dicing with beveled saws. We produced…
We propose a feedback-assisted direct laser writing method to perform laser ablation of fiber optics devices in which their light-collection signal is used to optimize their properties. A femtosecond-pulsed laser beam is used to ablate a…
We report on the 825-nm center wavelength, 9.17 mJ pulse energy Ti:sapphire-based femtosecond laser system simulation carried out by Lab2 tools in LabVIEW (National Instruments, Inc.). The design investigation and characterization of…
We present high-reflectivity substrate-transferred single-crystal GaAs/AlGaAs interference coatings at a center wavelength of 4.54 um with record-low excess optical loss below 10 parts per million. These high-performance mirrors are…
A single-mode Cs atom 852 nm Faraday laser based on the corner cube feedback is demonstrated, and termed as corner-cube-feedback Faraday laser. Using the corner-cube retroreflector as external cavity feedback element in Faraday laser,…
Ultra-high frequency acoustic resonances ($\backsim$2 GHz) trapped within the glass core ($\backsim$1 $\mu$m diameter) of a photonic crystal fiber are selectively excited through electrostriction using laser pulses of duration 100 ps and…
Superluminescent diodes are promising devices for applications in which low coherence, high efficiency, small foot-print and good optoelectronic integration are required. Blue emitting superluminescent diodes with good performances and easy…
We report a mid-infrared ring laser via fiber-to-waveguide hybrid integration enabled by directional couplers fabricated in fluoride glasses. Directional couplers were inscribed into fluoride glass using femtosecond laser direct writing,…
A single longitudinal mode fiber laser with ultra-narrow linewidth based on self-injection feedback by using the linewidth compress mechanism of Rayleigh backscattering (RBS) are proposed and demonstrated. Since the linewidth of RBS is…
We present a simple lithographic method for fabrication of microresonator devices at the optical fiber surface. First, we undress the predetermined surface areas of a fiber segment from the polymer coating with a focused CO2 laser beam.…
Three dimensional (3D) fast (< 0.5 hour) printing of micro-optical elements down to sub-wavelength resolution over 100 micrometers footprint areas using femtosecond (fs-)laser oscillator is presented. Using sub-1 nJ pulse energies, optical…
We demonstrate femtosecond performance of an ultra-broadband high-index-contrast saturable Bragg reflector consisting of a silicon/silicon-dioxide/germanium structure that is fully compatible with CMOS processing. This device offers a…
We present the development of a high power fibre laser system to investigate its suitability for use in a transverse electron beam profile monitor i.e. a laserwire. A system capable of producing individual pulses up to $165.8 \pm 0.4 \mu$J…
We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2…
We observe that focusing a femtosecond laser beam simultaneously chirped in time and space domains in glass can efficiently suppress the optical aberration caused by the refractive index mismatch at the interface of air and the glass…
techniques can be considered as an attractive alternative to the often-cumbersome traditional manufacturing routes. With the use of high-power lasers, localized hot zones that are necessary for glass making can be obtained rapidly. For…
We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength…
Electrically-pumped lasers directly grown on silicon are key devices interfacing silicon microelectronics and photonics. We report here, for the first time, an electrically-pumped, room-temperature, continuous-wave (CW) and single-mode…