Related papers: Robust design of Si/Si3N4 high contrast grating mi…
A high reflectivity and polarization selective high contrast grating mirror has been designed with the use of an automated optimization algorithm. Through a precise study of the tolerance of the different lengths of the structure, the…
High polarization selective Si/SiO2 mid-infrared sub-wavelength grating mirrors with large bandwidth adapted to VCSEL integration are compared. These mirrors have been automatically designed for operation at \lambda = 2.3 $\mu$m by an…
A GaAs/AlOx high contrast grating structure design which exhibits a 99.5% high reflectivity for a 425nm large bandwidth is reported. The high contrast grating (HCG) structure has been designed in order to enhance the properties of…
High-stress silicon nitride (Si3N4) membranes represent the state-of-the-art for cavity optomechanics, combining ultralow dissipation, optical transparency, and full compatibility with wafer-scale nanofabrication. Yet their integration into…
Immersed reflection gratings improve spectral resolving power by enabling diffraction within a high refractive index medium. This principle has been widely adopted to make grating spectrometers more compact. Conventional immersed gratings…
We have realized a suspended, high-reflectivity focusing metamirror ($f\approx 10$ cm, $\mathcal{R} \approx 99\%$) by non-periodic photonic crystal patterning of a Si$_3$N$_4$ membrane. The design enables construction of a stable, short…
We demonstrate a "membrane in the middle" optomechanical system using a silicon nitride membrane patterned as a subwavelength grating. The grating has a reflectivity of over 99.8%, effectively creating two sub-cavities, with free spectral…
We demonstrate micromechanical reflectors with a reflectivity as large as 99.4% and a mechanical quality factor Q as large as 7.8*10^5 for optomechanical applications. The reflectors are silicon nitride membranes patterned with…
We present design, fabrication and characterization of a MEMS VCSEL which utilizes a silicon-on-insulator wafer for the microelectromechanical system and encapsulates the MEMS by direct InP wafer bonding, which improves the protection and…
Highly reflective mirrors are indispensable components in a variety of state-of-the-art photonic devices. Typically used, bulky, multi-layered distributed Bragg (DBR) reflectors are limited to lattice-matched semiconductors or nonconductive…
We report on the first demonstration of a fully suspended 10m Fabry-Perot cavity incorporating a waveguide grating as the coupling mirror. The cavity was kept on resonance by reading out the length fluctuations via the Pound-Drever-Hall…
Silicon nitride (Si3N4), as a complementary metal-oxide-semiconductor (CMOS) material, finds wide use in modern integrated circuit (IC) technology. The past decade has witnessed tremendous development of Si3N4 in photonic areas, with…
State-of-the-art Ni/Ti supermirror neutron optics have limited reflected intensity and a restricted neutron energy range due to the interface width. Incorporating low-neutron-absorbing 11B4C enhances reflectivity and allows for thinner…
Diffraction gratings with high upward diffraction efficiency and large effective length are required for chip-scale light detection and ranging. In this paper, we propose a diffraction grating based on a multilayer silicon nitride…
While grating couplers have become the de-facto standard for optical access to integrated silicon photonics platforms, their performance at visible wavelengths, in moderate index contrast platforms like silicon nitride, leaves significant…
We analyze the diffraction characteristics of dielectric gratings that feature a high index grating layer, and devise, through rigorous numerical calculations, large bandwidth, highly efficient, high dispersion dielectric gratings in…
Recently High Electron Mobility Transistor (HEMT) inspired III-V electro-optic modulator topologies were proposed for realizing high speed electro-optic modulators leveraging plasma dispersion effect due to the 2D Electron Gas (2DEG)…
For trace gas sensing and precision spectroscopy, optical cavities incorporating low-loss mirrors are indispensable for path length and optical intensity enhancement. Optical interference coatings in the visible and near-infrared (NIR)…
We consider in this paper the angular deviation and diffraction efficiency of the reflection gratings in Littrow-configuration for applications of external cavity diode laser using the rigorous coupled-wave analysis method. We consider the…
A new dielectric Fabry-Perot cavity was designed for a resonant enhancing optical absorption by a thin absorber layer embedded into the cavity. In this cavity, the front mirror is a subwavelength grating with $\sim 100$% retroreflection.…