Related papers: Afterpulsing and Instability in Superconducting Na…
We propose a novel design of superconducting nanowire avalanche photodetectors (SNAPs), which combines the advantages of multi-stage avalanche SNAPs to lower the avalanche current I_AV and that of series-SNAPs to reduce the reset time. As…
We describe a micromachining process to allow the coupling of an array of single-mode telecommunication fibers to individual superconducting nanowire single photon detectors (SNSPDs). As proof of principle, we show the integration of four…
We investigated the timing jitter of superconducting nanowire avalanche photodetectors (SNAPs, also referred to as cascade switching superconducting single photon detectors) based on 30-nm-wide nanowires. At bias currents (IB) near the…
We report on the observation of a non-uniform dark count rate in Superconducting Nanowire Single Photon Detectors (SNSPDs), specifically focusing on an afterpulsing effect present when the SNSPD is operated at a high bias current regime.…
We investigate the recovery of superconducting NbN-nanowire photon counters after detection of an optical pulse at a wavelength of 1550 nm, and present a model that quantitatively accounts for our observations. The reset time is found to be…
Superconducting nanostrip single-photon detectors (SNSPD) are wide-spread tools in photonic quantum technologies. Here, we study afterpulsing in commercial SNSPD made of amorphous superconducting material. We find that the probability of an…
We present a stable and high-performance fiber-coupled NbTiN superconducting nanowire avalanche photon detector (SNAP). We demonstrate afterpulse-free operation in serially connected two SNAPs (SC-2SNAP), even in the absence of a choke…
Superconducting nanowire single-photon detectors (SNSPD), owing to their unique performance, are currently the standard detector in most demanding single-photon experiments. One important metric for any single-photon detector is the…
Practical superconducting nanowire single photon detectors (SNSPDs) demonstrate a strong trade-off between detection sensitivity and the reset time. Often, there are wide variations in sensitivity and response times from SNSPDs of the same…
Superconducting nanowire single-photon detectors are set apart from other photon counting technologies above all else by their extremely high speed, with few-ten-ps timing resolution, and recovery times $\tau_R\lesssim$10 ns after a…
We characterize the temporal evolution of the afterpulse probability in a free-running negative feedback avalanche diode (NFAD) over an extended range, from $\sim$300 ns to $\sim$1 ms. This is possible thanks to an extremely low dark count…
One of the key properties of single-photon detectors is their recovery time, i.e. the time required for the detector to recover its nominal efficiency. In the case of superconducting nanowire single-photon detectors (SNSPDs), which can…
Superconducting nanowire single-photon detectors (SNSPDs) are efficient measurement devices used for counting single photons. The field of their applications covers experimental quantum-optical studies, optical quantum computing, quantum…
Superconducting Nanowire Single Photon Detector (SNSPD) emerges as a potential candidate in the multiple fields requiring sensitive and fast photodetection. While nanowires of low temperature superconducting detectors are mature with…
We investigated the timing jitter of superconducting nanowire single-photon detectors (SNSPDs) and found a strong dependence on the detector response. By varying the multi-layer structure, we observed changes in pulse shape which are…
Avalanche photodetectors (APDs) are key components in optical communication systems due to their increased photocurrent gain and short response time as compared to conventional photodetectors. A detector design where the multiplication…
Properties of superconducting nanowires set the performance level for Superconducting Nanowire Single Photon Detectors (SNSPD). Reset time in commonly employed large area SNSPDs,5-10ns,is known to be limited by the nanowires kinetic…
Superconducting nanowire single photon detectors (SNSPDs) are typically used as single-mode-fiber-coupled single-pixel detectors, but large area detectors are increasingly critical for applications ranging from microscopy to free-space…
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection…
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPD) has delivered ex-cellent performance, and their increased adoption has had a great impact on a range of applications. One of the key…