Related papers: Afterpulsing and Instability in Superconducting Na…
Hamamatsu Photonics introduced a new generation of their Multi-Pixel Photon Counters in 2013 with significantly reduced after-pulsing rate. In this paper, we investigate the causes of after-pulsing by testing pre-2013 and post-2013 devices…
We present a method designed to efficiently extract optical signals from InGaAs avalanche photodiodes (APDs) operated in gated mode. In particular, our method permits an estimation of the fraction of counts which actually results from the…
We developed an electro thermal model of NbN superconducting nanowire avalanche photodetectors (SNAPs) on sapphire substrates. SNAPs are single photon detectors consisting of the parallel connection of N superconducting nanowires. We…
Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution…
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the…
Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark…
Superconducting nanowire single-photon detectors (SNSPDs) perform single-photon counting with exceptional sensitivity and time resolution at near-infrared wavelengths. State-of-the-art SNSPDs, based on 100 nm-wide, 4 to 5 nm thick NbN…
The observation of fast physical dynamics using optical techniques currently relies on indirect methods, such as pump-probe measurements. One reason for this is the lack of an efficient detector with high time resolution. Single-photon…
Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where…
We have found experimentally that the rise times of voltage pulses in NbN superconducting single photon detectors increase nonlinearly with increasing detector length. We fabricated superconducting single photon detectors based on NbN thin…
Latching is a serious issue in superconducting nanowire single-photon detector (SNSPD) technology. By extensively studying the electrical transportation characteristics of SNSPD with different bias schemes, we conclude that latching is a…
Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active…
Superconducting nanowire single photon detectors (SNSPDs) emerged in the last decade as a disruptive technology that features performance characteristics, such as high sensitivity, dynamic range and temporal accuracy, which are ideally…
Superconducting nanowire single photon detectors (SNSPDs) are fabricated directly on diamond substrates and their optical and electrical properties are characterized. Dark count performance and photon count rates are measured at varying…
Superconducting nanowire single-photon detectors (SNSPDs) can enable photon-number resolution (PNR) based on accurate measurements of the detector's response time to few-photon optical pulses. In this work we investigate the impact of the…
Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ~100 nm. Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons.…
We have performed a detailed study of the dependence of afterpulse probability in InGaAs/InP sine-gated SPAD on the dead time and the existing approach for its implementation. We demonstrated an electrical scheme combining sinusoidal gating…
We have performed a statistical characterization of the effect of afterpulsing in a free-running silicon single-photon detector by measuring the distribution of afterpulse waiting times in response to pulsed illumination and fitting it by a…
Single-photon detectors based on superconducting nanowires (SSPDs or SNSPDs) have rapidly emerged as a highly promising photon-counting technology for infrared wavelengths. These devices offer high efficiency, low dark counts and excellent…
InGaAs/InP-based semiconductor avalanche photodiode are usually employed for single-photon counting at telecom wavelength. However they are affected by afterpulsing which limits the diode performance. Recently, Princeton Lightwave has…