Related papers: CLIC QD0 "Short Prototype" Status
This paper gives the status of studies, design and prototype procurement for the magnets needed for the CLIC R&D and for the LAB and CLEX Test Programs.
Considering the current CLIC SiD detector design and the machine parameter L*, the final focus quadrupole QD0 will be placed inside the experiment itself. This configuration is very challenging from an integration point of view. Among…
A status report is given of the QCDOC project, a massively parallel computer optimized for lattice QCD using system-on-a-chip technology. We describe several of the hardware and software features unique to the QCDOC architecture and present…
The magnet system for the CLIC Detector concepts is composed of the central solenoid in combination with the two forward anti-solenoids and the ancillary systems necessary for their operation, including the so-called push-pull scenario,…
This paper gives an introduction to the layout of the CLIC Machine Detector Interface as it has been defined for the CLIC Conceptual Design Report. We concentrate on the specific case of the CLIC_SiD detector, although the push-pull concept…
Two high field quality quadrupole magnets QF1FF and QD0FF are required for the final focus system of the ATF3. In this paper we focus on the design of the QF1FF magnet. The proposed design is a permanent magnet quadrupole (PMQ) with…
We review some of the recent developments in QCD spin physics and highlight the spin program now underway at RHIC.
We have developed a new type of magnetometer consisting of a Hybrid Quantum Interference Device (HyQUID) that is set in a bi-stable state. We demonstrate its operation in a latching mode that can be employed to measure small changes in the…
The first FCC-ee final focus quadrupole prototype has been designed, manufactured, assembled and tested at warm. The prototype is a single aperture quadrupole magnet of the CCT type. One edge of the magnet was designed with local multipole…
This short paper introduces a model for the specification and verification of real-time system design: timed state transition diagrams.
In the present design of ILC, $L^*$, the distance between the interaction point (IP) and the front surface of the final focusing magnet (QD0), is 4.1 m. The QD0 is supported from the detector platform by a cantilever type support or from…
A single aperture Canted-Cosine-Theta (CCT) quadrupole magnet, made of NbTi superconductors, has been developed for the final focus region of the FCC-ee study. The conductor layout is optimised to mitigate edge effects on one of the two…
CLICTD is a monolithic silicon pixel sensor fabricated in a modified 180 nm CMOS imaging process with a small collection electrode design and a high-resistivity epitaxial layer. It features an innovative sub-pixel segmentation scheme and is…
A summary of new experimental results and recent theoretical developments discussed in the "Hadronic Final States and QCD" working group is presented.
The low-beta magnet systems are located in the Large Hadron Collider (LHC) insertion regions around the four interaction points. They are the key elements in the beams focusing/defocusing process allowing proton collisions at luminosity up…
This paper describes a new design of superconducting dipole magnet prototype by the use of tilted solenoids. The magnet prototype, which consists of four layers of superimposed tilted solenoids with operating current of 3708 A, will produce…
This review describes the composition of the Compact Muon Solenoid (CMS) detector and the methodology for modelling the heterogeneous CMS magnetic system, starting with the formulation of the magnetostatics problem for modelling the…
Quantum Diamond Microscope (QDM) magnetic field imaging is an emerging interrogation and diagnostic technique for integrated circuits (ICs). To date, the ICs measured with a QDM were either too complex for us to predict the expected…
A 325 MHz aluminum prototype of a spatially periodic rf quadrupole focusing linac was developed at the Institute of Modern Physics, Chinese Academy of Sciences, as a promising candidate for the front end of a high-current linac. It consists…
This contribution to LCWS2016 presents recent developments within the CLICdp collaboration. An updated scenario for the staged operation of CLIC has been published; the accelerator will operate at 380 GeV, 1.5 TeV and 3 TeV. The lowest…