Related papers: Evolution of Plastic Strain During a Flow Forming …
Unstable systems of fluidized grains in a very-narrow vertical tube can auto-defluidize after some time, the settling particles forming either a glass- or crystal-like structure. We carried out experiments using different polymer spheres,…
We study the statistical properties of the yielding transition in model amorphous solids in the limit of slow, athermal deformation. Plastic flow occurs via alternating phases of elastic loading punctuated by rapid dissipative events in the…
Amorphous solids under mechanical strains are prone to plastic responses. Recent work showed that in amorphous granular system these plastic events, that are typically quadrupolar in nature, can screen the elastic response. When the density…
Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show,…
Steady state plastic flows have been compared to developed turbulence because the two phenomena share the inherent complexity of particle trajectories, the scale free spatial patterns and the power law statistics of fluctuations. The origin…
Cold compaction of ceramic powders is driven by plastic strain, during which the elastic stiffness of the material progressively increases from values typical of granular matter to those representative of a fully dense solid. This increase…
Atomistic deformation simulations in the nominally elastic regime are performed for a model binary glass with strain rates as low as $10^{4}$/sec (corresponding to 0.01 shear strain per 1$\mu$sec). A robust elasticity is revealed that…
A thin circular elastic sheet floating on a drop-like liquid substrate is deformed due to incompatibility between the curved substrate and the planar sheet. We adopt a variational viewpoint by minimizing the non-convex membrane energy…
What characterises a solid is its way to respond to external stresses. Ordered solids, such crystals, display an elastic regime followed by a plastic one, both well understood microscopically in terms of lattice distortion and dislocations.…
We study the linear stability of Plane Poiseuille flow of an elastoviscoplastic fluid using a revised version of the model proposed by Putz and Burghelea (Rheol. Acta (2009)48:673-689). The evolution of the microstructure upon a gradual…
We have studied shrinkage crack patterns which form when a thin layer of an alumina/water slurry dries. Both isotropic and directional drying were studied. The dynamics of the pattern formation process and the geometric properties of the…
Metallic glasses are known to have a remarkably robust yield strength, admitting Weibull moduli as high as for crystalline engineering alloys. However, their post-yielding behavior is strongly varying, with large scatter in both flow stress…
A minimal athermal model for the flow of dense disordered materials is proposed, based on two generic ingredients: local plastic events occuring above a microscopic yield stress, and the non-local elastic release of the stress these events…
The water impact of an inclined flat plate and at high horizontal velocity is experimentally investigated with focus on the fluid-structure interaction aspects. Several test conditions have been examined by varying the vertical to…
Continuum models of plasticity fail to capture the richness of microstructural evolution because the continuum is a homogeneous construction. The present study shows that an alternative way is available at the mesoscale in the form of truly…
We study shear yielding and steady state flow of glassy materials with molecular dynamics simulations of two standard models: amorphous polymers and bidisperse Lennard-Jones glasses. For a fixed strain rate, the maximum shear yield stress…
Recoverable strain is the strain recovered once a stress is removed from a body, in the direction opposite to that in which the stress had acted. To date, the phenomenon has been understood as being elastic in origin: polymer chains…
As an extension to strain-gradient models of size-dependent plastic behaviour, this work proposes a model for a stress-gradient theory. The model is distinguished from earlier works on the topic by its being embedded in a thermodynamically…
In addition of a flow, plastic deformation of structural glasses (in particular amorphous silica) is characterized by a permanent densification. Raman spectroscopic estimators are shown to give a full account of the plastic behavior of…
Amorphous magnetic solids, like metallic glasses, exhibit a novel effect: the growth of magnetic order as a function of mechanical strain under athermal conditions in the presence of a magnetic field. The magnetic moment increases in steps…