Related papers: Superconducting Low-Inductance Undulatory Galvanom…
A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. These amplifiers serve a broad spectrum of applications in quantum computing, including…
We present a new theoretical framework to analyze microwave amplifiers based on the dc SQUID. Our analysis applies input-output theory generalized for Josephson junction devices biased in the running state. Using this approach we express…
We report on the noise of a lumped element Direct Current Superconducting Quantum Interference Device amplifier. We show that the noise temperature in the 4 GHz-8 GHz range over ranges of 10's of MHz is below 1 kelvin (three photons of…
This study undertakes the theoretical design, CAD modeling, realization, and performance analysis of a microwave low-noise amplifier (LNA) which has been accurately developed for operation at 3.0 GHz (S-band). The objective of this research…
Investigations into the propagation characteristics, specifically loss and wave velocity, of superconducting coplanar waveguides and microstrip lines were conducted at a 2 mm wavelength. This was achieved through the measurement of on-chip…
Clock generation is an essential part of wireless or wireline communication modules. To facilitate recent advancements in wireline-like communication and in-sensor computing modules at relatively lower data rates, ultra-low power, and…
The addition of nonlinearity to an harmonic resonator provides a route to complex dynamical behaviour of resonant modes, including coupling between them. We present a superconducting device that makes use of the nonlinearity of Josephson…
We present a design and implementation of frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC-loop to a current-biased feedline; the resulting screening current…
We have constructed a new type of amplifier whose primary purpose is the readout of superconducting quantum bits. It is based on the transition of an RF-driven Josephson junction between two distinct oscillation states near a dynamical…
A Rydberg superheterodyne sensing architecture is demonstrated in which a self-sustained oscillator (SSO) serves as a dynamically perturbed local oscillator (LO) for microwave detection. The SSO is realized by a phase-controlled…
We report the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use the superconducting nonlinear asymmetric inductive element (SNAIL) loops,…
This paper presents the analysis, design, fabrication, and measurement of an integrated low-noise amplifier (LNA) implemented using a 130 nm CMOS technology, operating in the 2.4 GHz band. The LNA is a crucial component in the performance…
Broadband impedance-matched Josephson parametric amplifiers are key components for high-fidelity single-shot multi-qubit readout. Nowadays, several types of impedance matched parametric amplifiers have been proposed: the first is an…
Superconducting inductors with impedance surpassing the resistance quantum, i.e., superinductors, are important for quantum technologies because they enable the development of protected qubits, enhance coupling to systems with small…
The Substrate Integrated Waveguide (SIW) technology is a very promising technique with which we can take the advantages of both waveguides and planar transmission lines. Therefore, in [2.1-3] GHz band various microwave components and…
We have developed a Josephson parametric amplifier, comprising a superconducting coplanar waveguide resonator terminated by a dc SQUID (superconducting quantum interference device). An external field (the pump, $\sim 20$ GHz) modulates the…
In high-performance RF transceivers the thrust of has been on lower noise LNAs and high-power high-speed PAs. The performance trade-off has forced many solutions to have the LNA and PA on a separate die compared to the rest of baseband.…
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this…
We exploit nonlinearity in NbN superconducting stripline resonators, which is originated by local thermal instability, for studying stochastic resonance. As the resonators are driven into instability, small amplitude modulated (AM)…
There is currently fundamental and technological interest in measuring and manipulating nanoscale magnets, particularly in the quantum coherent regime. To observe the dynamics of such systems one requires a magnetometer with not only…