Related papers: A Comparative Study Between a Micromechanical Cant…
Microelectromechanical system (MEMS) based on-chip resonators offer great potential for high frequency signal processing circuits like reference oscillators and filters. This is due to their exceptional features like small size, large…
Over the past few years, microelectromechanical system (MEMS) based on-chip resonators have shown significant potential for sensing and high frequency signal processing applications. This is due to their excellent features like small size,…
The very significant growth of the wireless communication industry has spawned tremendous interest in the development of high performances radio frequencies (RF) components. Micro Electro Mechanical Systems (MEMS) are good candidates to…
The extensive research and development of micromechanical resonators is trying to allow the use of these devices for highly sensitive applications. Microcantilevers are some of the simplest MEMS structure and had been proved to be a good…
A maskless post-processing technique for CMOS chips is developed that enables the fabrication of RF MEMS parallel-plate capacitors with a high quality factor and a very compact size. Simulations and measured results are presented for…
Microelectromechanical systems (MEMS) resonators serve as frequency selective components in applications ranging from biology to communications. In this paper, the dynamic behavior of an RF MEMS disk resonator is formulated using an…
Nanomechanical resonator-based sensing devices are used in medical diagnostics based on their high-frequency dynamic behavior. Cantilevers fall into the category of Nanomechanical resonators. It also resembles a resonator whose shape is…
Microelectromechanical system (MEMS) based on-chip resonators offer great potential for sensing and high frequency signal processing applications due to their exceptional features like small size, large frequency-quality factor product,…
In RF (Radio Frequency) domain, one of the limitations of using MEMS (Micro Electromechanical Systems) switching devices for medium power applications is RF power. Failure phenomena appear even for 500 mW. A design of MEMS switched…
The Bessel filters are optimized to collect competent transient response due to a linear phase in the passband. In other words, during the filtering process, there will be comparatively impoverished frequency response with lower amplitude…
Implementing microelectromechanical system (MEMS) resonators calls for detailed microscopic understanding of the devices, such as energy dissipation channels, spurious modes, and imperfections from microfabrication. Here, we report the…
A High-Q microwave (K band) MEMS resonator is presented, which empolys substrate integrated waveguide (SIW) and micromachined via-hole arrays by ICP process. Nonradiation dielectric waveguide (NRD) is formed by metal filled via-hole arrays…
This paper presents novel designs, analysis, and performance of 4-pole and 8-pole microwave and millimeter-wave (MMW) waveguide filters for operation at X and Y frequency bands. The waveguide filters have been designed and analyzed based on…
Optically resonant dielectric metasurfaces offer unique capability to fully control the wavefront, polarisation, intensity or spectral content of light based on the excitation and interference of different electric and magnetic Mie…
A simple and fast process for micro-electromechanical (MEM) resonators with deep sub-micron transduction gaps in thin SOI is presented in this paper. Thin SOI wafers are important for advanced CMOS technology and thus are evaluated as…
Microelectromechanical systems (MEMS) can offer a competitive alternative for conventional technology in electrical precision measurements. This article summarises recent work in development of MEMS solutions for electrical metrology.…
Filtering modules are essential devices of modern microwave systems given their capability to improve the signal-to-noise ratio of the received signal or to eliminate the unwanted interferences. For discriminating between different…
Active microelectromechanical systems can couple the nanomechanical domain with the electronic domain by integrating electronic sensing and actuation mechanisms into the micromechanical device. This enables very fast and sensitive…
Reconfigurable meta-surface (RMS) is proposed as a very promising and novel technology, which is composed of a large number of low-cost passive elements, and can achieve passive beamforming by controlling the amplitude and phase of incident…
In this paper, a very compact and low insertion loss metamaterial band-pass filter (MBPF) at the center frequency of f0=730 MHz is proposed, based on the rectangular-shape 4 turn complementary spiral resonators (4 CSR). The proposed MBPF…