Related papers: Transparent yttrium hydride thin films prepared by…
We report a simple technique for the synthesis of uniaxially textured, metastable hexagonal close-packed-like uranium thin films with thicknesses between 175-2800 \r{A}. The initial structure and texture of the layers have been studied via…
Superconducting thick films (200$\mu$m-300$\mu$m) of YBCO have been fabricated successfully on MgO substrates by a new approach. The precursor powders (YBa2Cu3O7-$\delta$(Y123)+0.1molY2BaCuO5(Y211)) are placed between two MgO (10mm x 10mm)…
We study the magnetoresistance of yttrium iron garnet/Pt heterostructures in which the Pt layer was grown via atomic layer deposition (ALD). Magnetotransport experiments in three orthogonal rotation planes reveal the hallmark features of…
Bulk rhenium trioxide (ReO3) has an unusually high electrical conductivity and, being nanosized, has promising catalytic properties. However, the production of pure ReO3 thin films is challenging due to the difficulty to stabilize rhenium…
A comparative study of the structural, optical and morphological properties of Cu2ZnSnS4 (CZTS) thin films prepared by two different techniques was performed. One consists of sequential evaporation of the elemental metallic precursors under…
In this study we report a method for the preparation of freestanding magnetocaloric thin films. Non-stoichiometric Heusler alloys Ni-Mn-Sn, Ni-Co-Mn-Sn and Ni-Co-Mn-Al are prepared via sputter deposition. A sacrificial vanadium layer is…
A route to break molecular nitrogen (N2) under mild conditions is demonstrated by N2 gas cracking on, and incorporation into, lanthanide films. Successful growth of lanthanide nitride thin films, made by evaporation of lanthanides in a…
The fabrication of optically smooth thin Sn films by vacuum or electrodeposition techniques is usually challenging. Little has been published on how to address this challenge mainly because very few applications require such smooth Sn…
Metal mixed polymers are a cheap and effective way to produce flexible metals and superconductors. As part of an on-going effort to learn how to tune the properties of these systems with ion implantation, we present a study of the…
Herein we report on the synthesis of a metastable (Cr,Y)2AlC MAX phase solid solution by co-sputtering from a composite Cr-Al-C and elemental Y target, at room temperature, followed by annealing. While direct high-temperature synthesis…
Microfluidic devices are increasingly used in synchrotron-based experiments to deliver and probe liquid samples, offering advantages such as minimal sample consumption and reduced radiation damage. Despite their growing use, few devices…
Hydrogen-based magneto-ionics is a promising approach for rapid magnetoelectric control of spintronic devices. Most investigations so far into the magneto-ionic manipulation of rare-earth transition-metal alloys have used electrochemical…
The flourishing rare earth superhydrides are a class of recently discovered materials that possess near-room-temperature superconductivity at high pressures, opening a new era of superconductivity research at high pressures. Among these…
The size of the band gap and the energy position of the band edges make several oxynitride semiconductors promising candidates for efficient hydrogen and oxygen production under solar light illumination. The intense research efforts…
Beryllium nitride thin films were grown on silicon substrates by laser ablating a beryllium foil in molecular nitrogen ambient. The composition and chemical state were determined with Auger (AES), X-Ray photoelectron (XPS) and energy loss…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
Thin Yttrium Iron Garnet (YIG) is a promising material for integrated magnonics. In order to introduce YIG into nanofabrication processes it is necessary to fabricate very thin YIG films with a thickness well below 100 nm while retaining…
Realizing laterally continuous ultra-thin gold films on transparent substrates is a challenge of significant technological importance. In the present work, formation of ultra-thin gold films on fused silica is studied, demonstrating how…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
Half-Heusler YPtSb thin films were fabricated by magnetron co-sputtering method on MgO-buffered SiO2/Si(001) substrates. X-ray diffraction pattern and Energy dispersive X-ray spectroscopy confirmed the high-quality growth and stoichiometry.…