Related papers: Monopolelike probes for quantitative magnetic forc…
We demonstrate the quantitative measurement of the magnetization of individual magnetic nanoparticles (MNP) using a magnetic force microscope (MFM). The quantitative measurement is realized by calibration of the MFM signal using an MNP…
The magnetic properties of arrays of nanowires (NWs) and nanotubes (NTs), 150 nm in diameter, electrodeposited inside nanoporous polycarbonate membranes are investigated. The comparison of the nanoscopic magnetic force microscopy (MFM)…
We have characterized a new Magnetic Force Microscopy (MFM) probe based on an iron filled carbon nanotube (FeCNT) using MFM imaging on permalloy (Py) disks saturated in a high magnetic field perpendicular to the disk plane. The experimental…
A recent advance in improving the spatial resolution of magnetic force microscopy (MFM) uses as sensor tips carbon nanotubes grown at the apex of conventional silicon cantilever pyramids and coated with a thin ferromagnetic layer. Magnetic…
We present a method to map the saturation magnetization of soft ultrathin films with perpendicular anisotropy, and we illustrate it to assess the compositional dependence of the magnetization of CoFeB(1 nm)/MgO films. The method relies on…
We present a comprehensive method for visualisation and quantification of the magnetic stray field of magnetic force microscopy (MFM) probes, applied to the particular case of custom-made multi-layered probes with controllable high/low…
We present an alternative switching-magnetization magnetic force microscopy (SM- MFM) method using planar tip-on-chip probes. Unlike traditional needle-like tips, the planar probe approach integrates a microdevice near the tip apex with…
The presence of a domain wall trapped by a sub-micron notch is probed in two ways: through electronic transport measurements and by Magnetic Force Microscopy (MFM). We observe complex magnetic features which are consistent with numerical…
Since the invention of the atomic force microscope (AFM) in 1986, there has been a drive to apply this scanning probe technique or a form of this technique to various disciplines in nanoscale science. Magnetic force microscopy (MFM) is a…
Magnetic force microscopy is a widespread technique for imaging magnetic structures with a resolution of some 10 nanometers. MFM can be calibrated to obtain quantitative spatially resolved magnetization data in units of A/m by determining…
We fabricated cantilevers for magnetic force microscopy with carbon nanotube tips coated with magnetic material. Images of a custom hard drive demonstrated 20 nm lateral resolution, with prospects for further improvements.
Recently synthesized magnetic multilayers with strong perpendicular anisotropy exhibit unique magnetic properties including the formation of specific multidomain states. In particular, antiferromagnetically coupled multilayers own rich…
By Monte Carlo simulations in the canonical ensemble, we have studied the magnetic anisotropy in Fe/Dy amorphous multilayers. This work has been motivated by experimental results which show a clear correlation between the magnetic…
In this study we present a new method of measuring magnetostriction with an atomic force microscope adapted for the application magnetic fields. The experiment allows us to visualise, in an elegant and educational way how the lateral…
A number of aspects of magnetic force microscopy (MFM) specific to the imaging of hard magnetic films have been studied. Firstly, we show that topographic images made in tapping mode with probes characterized by the moderate cantilever…
A MOKE magnetometry unit simultaneously sensitive to both in-plane magnetization components, based on an intensity differential detection method, allows us to observe the uniaxial anisotropy impressed during CoFe-deposition and to…
We use an Atomic Force Microscope (AFM) tip to locally probe the electronic properties of semiconducting carbon nanotube transistors. A gold-coated AFM tip serves as a voltage or current probe in three-probe measurement setup. Using the tip…
Magnetic force microscopy (MFM) allows one to image the domain structure of ferromagnetic samples by probing the dipole forces between a magnetic probe tip and a magnetic sample. The magnetic domain structure of the sample depends on the…
Magnetic force microscopy (MFM) measurements generally provide phase images which represent the signature of domain structures on the surface of nanomaterials. To quantitatively determine magnetic stray fields based on an MFM image requires…
We have developed the experimental approach to characterize spatial distribution of the magnetic field produced by cantilever tips used in magnetic resonance force microscopy (MRFM). We performed MRFM measurements on a well characterized…