Related papers: Correlation between structural defects and optical…
Formation of twin boundaries during the growth of semiconductor nanowires is very common. However, the effects of such planar defects on the electronic and optical properties of nanowires are not very well understood. Here, we use a…
The effect of oxygen partial pressure during the pre-calcination step (high vacuum, air, nitrogen, and oxygen) on the crystal structure, microstructure, and electrical properties of Na0.5Bi0.465Sr0.02Eu0.005TiO3 oxide-ion-conducting…
Upgrades to ground-based gravitational-wave observatories will require mirror coatings with reduced thermal noise, enabling improved detector sensitivity and extended astrophysical reach. Recent studies have shown that optical coatings…
Growth of GaN nanowires are carried out via metal initiated vapor-liquid-solid mechanism, with Au as the catalyst. In chemical vapour deposition technique, GaN nanowires are usually grown at high temperatures in the range of 900-1100 ^oC…
Copper oxide (CuO) thin films have been deposited on glass substrates by a facile sol-gel dip-coating technique with varying withdrawal speeds from 0.73 to 4.17 mm/s. The variation of film thickness manifested by dip-coating withdrawal…
The pairing mechanism of high-temperature superconductivity in cuprates remains the biggest unresolved mystery in condensed matter physics. To solve the problem, one of the most effective approaches is to investigate directly the…
High-transition-temperature superconductivity arises in copper oxides when holes or electrons are doped into the CuO2 planes of their insulating parent compounds. While hole-doping quickly induces metallic behavior and superconductivity in…
The heat-treated oxyfluoride glasses with different contents of thulium Tm3+ and holmium Ho3+ ions have been studied using small-angle X-ray scattering and diffraction. With an increase in relative concentration of added Ho2O3 and Tm2O3…
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the…
It is shown that nanotubes with thicker walls can be grown from strongly bonded multi-layered structures only in accord with some basic crystallographic principles. Either the diameters of such tubes remain large in comparison with the…
The miniaturization of diagnostic devices that exploit optical detection schemes requires the design of light-sources combining small size, high performance for effective excitation of chromophores, and mechanical flexibility for easy…
Thermal plasma has emerged as an effective approach for producing carbon nanostructures without the need for specific catalysts nor substrates. While efforts have focused on the effect of process parameters such as reaction pressure, input…
We show a general two-step method to grow hydroxide and oxide nanocrystals of the iron family elements (Ni, Co, Fe) on graphene with two degrees of oxidation. Drastically different nanocrystal growth behaviors were observed on low-oxidation…
Samples of nitrogen-doped titanium dioxide (anatase, $0.2 \leq N \leq 1.0~wt\%$) prepared by the sol-gel method were investigated using X-band EPR spectroscopy, photoconductivity and photocatalysis measurements. $N\bullet$ and $NO\bullet$…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
The present study elucidates the correlation between the structural and optical properties of GaN nanowires grown on Si(111) substrate by plasma assisted molecular beam epitaxy (PA-MBE) technique under various growth conditions. GaN NWs…
The oxidation behavior of W-Zr thin-film metallic glasses (TFMGs) with 32, 48 and 61 at.% Zr, prepared by dc magnetron co-sputtering, was comprehensively studied after annealing in synthetic air. The study focuses on the effect of the…
We show that elongated nanowires can be grown on crystal surfaces by allowing large strained two-dimensional islands to desorb by varying the adatom supersaturation or chemical potential. The width of the wires formed in this process is…
Spin coating technique was employed to fabricate CuO films at different spin speeds for different time duration, and they were annealed at different temperatures for different time durations in air. These thin films were characterized using…
Strained nanowires with varying InAs/InP core-shell thicknesses were grown using Chemical Beam Epitaxy. Microphotoluminescence spectroscopy, performed at low temperature, was then used to study the optical properties of single wires.…