Related papers: Correlation between structural defects and optical…

Large-scale CuO nanowires are commonly synthesized by the thermal oxidation method. However, the growth mechanism remains controversial between diffusion growth mechanism and vapor-solid (VS) growth mechanism. In this study, we investigated…

We report the growth of Al-catalysed ZnO nanowires (NWs) using a thermal evaporation technique.Before the growth, the substrates were covered with a distribution of Al nano-island that act as seeds. We found that the density of NWs…

Manipulation of surface architecture of semiconducting nanowires with a control in surface polarity is one of the important objectives for nanowire based electronic and optoelectronic devices for commercialization. We report the growth of…

We have investigated the formation of tungsten oxide nanowires under different CVD conditions. We find that exposure of oxidized tungsten films to hydrogen and methane at 900C leads to the formation of a dense array of typically 10 nm…

We present Al2O3-ZnAl2O4-ZnO nanostructure, which could be a prominent candidate for optoelectronics, mechanical and sensing applications. While ZnO and ZnAl2O4 composites are mostly synthesized by sol-gel technique, we propose a…

Optically active gold-catalyzed ZnTe nanowires have been grown by molecular beam epitaxy, on a ZnTe(111) buffer layer, at low temperature 350\degree under Te rich conditions, and at ultra-low density (from 1 to 5 nanowires per…

Ion implantation is an interesting method to dope semiconducting materials such as zinc oxide provided that the implantation-induced defects can be subsequently removed. Nitrogen implantation followed by anneals under O2 were carried out on…

Ca2-xNaxCuO2Cl2 is a structural analogue to the La2-xSrxCuO4 superconductor. By substituting Na+ for Ca2+ mobile holes are introduced into the CuO2 planes. A series of experiments shows that the Na content x depends not only on the pressure…

The structure-property relation of nanostructured Al-doped ZnO thin films has been investigated in detail through a systematic variation of structure and morphology, with particular emphasis on how they affect optical and electrical…

Polycrystalline samples and submillimeter size single crystals of Na-doped Ca2CuO2Cl2 have been synthesized under high pressure. A series of experiments showed that the Na content depends not only on the pressure during the synthesis but…

Nanostructured metal oxides, such as Cu2O, CeO2, {\alpha}-Fe2O3, and TiO2 can efficiently mediate photocatalysis for solar-to-chemical energy conversion and pollution remediation. In this contribution, we report a novel approach, dielectric…

Cu2O nanorods have been deposited on soda-lime glass (SLG) substrates by the modified SILAR technique by varying the concentration of NaCl electrolyte into the precursor complex solution. The structural, electrical, and optical properties…

The shape-controlled synthesis of cuprous oxide (Cu$_2$O) photocatalysts with both low or high index crystal planes has received increasing attention due to their unique facet-dependent properties. Since they are cheap and earth abundant,…

Cuprous oxide (Cu2O) films from 25 nm to 1500 nm were electrodeposited on n-Si(100) and Ni/n-Si(100) substrates from aqueous solution at room temperature. X-ray diffraction and transmission electron microscopy imaging show that the Cu2O…

Au-Cu bimetallic nanoparticles (NPs) grown on TiO 2 (110) have been followed in-situ using grazing incidence x-ray diffraction and x-ray photoemission spectroscopy from their synthesis to their exposure to a CO/O 2 mixture at low pressure…

NiO layers were grown on MgO(100), MgO(110), and MgO(111) substrates by plasma-assisted molecular beam epitaxy under Ni-flux limited growth conditions. Single crystalline growth with a cube-on-cube epitaxial relationship was confirmed by…

Role of 'O' defects in sensing pollutant with nanostructured SnO_2 is not well understood, especially at low temperatures. SnO_2 nanoparticles were grown by soft chemistry route followed by subsequent annealing treatment under specific…

Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by…

Thin films of Cu-W-O ternary compounds were fabricated via DC magnetron co-sputtering from Cu and W metallic targets under controlled oxygen partial pressures, followed by thermal annealing. Low-oxygen conditions favored the formation of a…

Highly crystalline UO2 nanoparticles (NPs) with sizes of 2-3 nm were produced by fast chemical deposition of uranium(IV) under reducing conditions at pH 8-11. The particles were then characterized by microscopic and spectroscopic techniques…