Related papers: Level Shifter Design for Low Power Applications
Reduction in power consumption has become a major criterion of design in modern ICs. One such scheme to reduce power consumption by an IC is the use of multiple power supplies for critical and non-critical paths. To maintain the impedance…
In recent years, the energy consumption of computing systems has increased and a large fraction of this energy is consumed in main memory. Towards this, researchers have proposed use of non-volatile memory, such as phase change memory…
Numerous proposed and developed superconducting fault current limiters and self-limiting transformers limit successfully fault currents but do not provide uninterrupted supplying of consumers. A design investigated in the work combines the…
Recent reports on machine learning (ML) and machine vision (MV) devices have demonstrated the potentials of 2D materials and devices. Yet, scalable 2D devices are being challenged by contact resistance and Fermi Level Pinning (FLP), power…
A line driver with configurable pre-emphasis is implemented in a 65 nm CMOS process. The driver utilizes a three-tap feed-forward equalization (FFE) architecture. The relative delays between the taps are selectable in increments of 1/16th…
This work presents a new silicon vertical JFET (V-JFET) device, based on the trenched 3D-detector technology developed at IMB-CNM, to be used as switches for the High-Voltage powering scheme of the ATLAS upgrade Inner Tracker. The…
We present a complete top-down design of a low-power multi-channel clock recovery circuit based on gated current-controlled oscillators. The flow includes several tools and methods used to specify block constraints, to design and verify the…
This paper proposes a new topology of a non-isolated two-phase interleaved boost DC-DC converters with modified Greinacher voltage multiplier cells (VMCs) in continuous conduction mode (CCM). The proposed topology can quickly achieve a high…
With the extreme scaling, active devices in both CMOS and BiCMOS technologies have reached outstanding ft/fmax, enabling an ever-increasing number of existing and emerging applications in the microwave and millimeter wave (mm-wave)…
CMOS microprocessors have achieved massive energy efficiency gains but may reach limits soon. This paper presents an approach to estimating the limits on the maximum floating point operations per Joule (FLOP/J) for CMOS microprocessors. We…
The inability to efficiently tune the optical properties of waveguiding structures has been one of the major hurdles for the future scalability of integrated photonic systems. In silicon photonics, although dynamic tuning has been achieved…
In this paper a CMOS two stage operational amplifier has been presented which operates at 1.8 V power supply at 0.18 micron (i.e., 180 nm) technology and whose input is depended on Bias Current. The op-amp provides a gain of 63dB and a…
A novel room temperature capacitance-to-phase transducer is described, which uses a modified All-Pass filter architecture combined with a simple series resonant tank circuit with a moderate Q-factor. It is fashioned from a discrete inductor…
In this brief, we present a low-loss mechanically reconfigurable phase shifter implemented in gap-waveguide technology for mm-wave frequencies. The proposed design gives a practical implementation of tuning elements inside the waveguide…
A low power magnetization switching scheme based on the voltage control of magnetic anisotropy (VCMA) is proposed. In contrast to the conventional switching scheme using VCMA, where the magnetic anisotropy is eliminated during the voltage…
To continue scaling beyond 2-D CMOS with 3-D integration, any new 3-D IC technology has to be comparable or better than 2-D CMOS in terms of scalability, enhanced functionality, density, power, performance, cost, and reliability.…
In many modern AI chips and multicore systems-on-chip, embedded applications exhibit predictable inter-core traffic behavior that can be characterized at design time. For such applications, a variety of design-time traffic management and…
A high step up dc dc converter based on an isolated dc dc converter with voltage multiplier cells for photovoltaic systems is essentially introduced in this paper. The proposed converter can provide a high step up voltage gain. The switch…
The reflecting antenna elements in most reconfigurable intelligent surfaces (RISs) use semiconductor-based (e.g., positive-intrinsic-negative (PIN) diodes and varactors) phase shifters. Although effective, a drawback of this technology is…
Silicon-based waveguide plasmon detectors have a great research interest because of CMOS compatibility and integration capability with other plasmonic integrated circuits. In this paper, a balanced metal-semiconductor-metal (MSM) integrated…