Related papers: Tunable superconducting nanoinductors
Making use of focused Ga-ion beam (FIB) fabrication technology, the evolution with device dimension of the low-temperature electrical properties of Nb nanowires has been examined in a regime where crossover from Josephson-like to insulating…
We are developing a superconductor electronics fabrication process with up to nine planarized superconducting layers, stackable stud vias, self-shunted Nb/AlOx-Al/Nb Josephson junctions, and one layer of MoNx kinetic inductors. The minimum…
Niobium and its alloys with early transition metals have been extensively studied for their excellent superconducting properties. They have high transition temperatures, strong upper critical fields, and high critical current densities,…
We present measurements of the self- and mutual inductance of NbN and bilayer NbN/Nb inductors with Nb ground plane(s) fabricated in an advanced process for superconductor electronics developed at MIT Lincoln Laboratory. In this process,…
We fabricate superconducting ion traps with niobium and niobium nitride and trap single 88Sr ions at cryogenic temperatures. The superconducting transition is verified and characterized by measuring the resistance and critical current using…
The exploration of the superconductivity in two-dimensional materials has garnered significant attention due to their promising low-power applications and fundamental scientific interest. Here, we report some novel stable non-van der Waals…
Niobium carbide (NbC) is a high-field Type II superconductor with a critical temperature ($T_C$) of 11.1 K, just above that of pure Nb ($T_C = 9$ K). Downsizing NbC to the nanoparticle scale introduces significant alterations in its…
Kinetic inductance in thin film superconductors has been used as the basis for low-temperature, low-noise photon detectors. In particular thin films such as NbTiN, TiN, NbN, the kinetic inductance effect is strongly non-linear in the…
Superconducting resonators and parametric amplifiers are important components in scientific systems such as kinetic inductance detector arrays, frequency-domain multiplexers for other superconducting bolometers, spin-ensemble based…
Niobium polyhydride was synthesized at high pressure and high temperature conditions by using diamond anvil cell combined with in situ high pressure laser heating techniques. High pressure electric transport experiments demonstrate that…
Superconducting devices are prone to reduced performance caused by impurities and defects along the edges of their wires, which can lead to local current crowding. In this study, we explored the use of helium ion irradiation to modify the…
We have successfully fabricated micron-scale Cu-AlO$_{x} $-Al-NbN normal metal-insulator-superconductor (NIS) tunnel junction devices, using pulsed laser deposition (PLD) for NbN film growth, and electron-beam lithography and shadow…
We demonstrate a high electron conductivity (> 10^2 S/cm and up to 10^3 S/cm) of tungsten suboxide W18O(52.4-52.9)(or equivalently WO(2.91-2.94)) nanotubes (2 to 3 nm in diameter, ca. micrometer long). The conductivity is measured in the…
The discovery of van der Waals superconductors in recent years has generated a lot of excitement for their potentially novel pairing mechanisms. However, their typical atomic-scale thickness and micrometer-scale lateral dimensions impose…
To increase density of superconductor digital and neuromorphic circuits by 10x and reach integration scale of $10^8$ Josephson junctions (JJs) per chip, we developed a new fabrication process on 200-mm wafers, using self-shunted…
We demonstrate the operation of superconducting coplanar microwave resonators in a very large frequency range up to 50 GHz. The resonators are fabricated from niobium thin films on sapphire substrates and optimized for these high…
Nanoscale electromechanical coupling provides a unique route towards control of mechanical motions and microwave fields in superconducting cavity electromechanical devices. Though their successes in utilizing the optomechanical or…
Niobium nitride (NbN) is widely used in high-frequency superconducting electronics circuits because it has one of the highest superconducting transition temperatures ($T_c$ $\sim$ 16.5 K) and largest gap among conventional superconductors.…
We report on the preparation of carbon nanotube quantum dots using superconducting electrodes made of niobium. Gate-controllable supercurrents with values of up to 30 nA are induced by the proximity effect. The IV-curves are hysteretic at…
Superconducting quantum interference devices (SQUIDs) are used for applications ranging from sensitive magnetometers to low-temperature electronics and quantum computation. We introduce a planar nano SQUID that was made with a single…