Related papers: The GlueX Central Drift Chamber: Design and Perfor…
First prototypes of large area, p-n junction, silicon carbide (SiC) detectors have been produced as part of an ongoing programme to develop a new particle identification wall for the focal plane detector of the MAGNEX magnetic spectrometer,…
Studies of Cathode Strip Chamber longevity, comparing Ar+CO2 gas mixtures with fractions of 5%, 2%, and 0% CF4, were performed using several small cathode strip prototype chambers. In each trial, a localized source of radiation was used to…
A prototype of a single-gap glass Resistive Plate Chamber (RPC) is constructed by the authors. To find the considerations required for better operation of the detector's gas system, we have simulated the flow of the Ar gas through the…
ATLAS muon detector upgrades aim for increased acceptance for muon triggering and precision tracking and for improved rate capability of the muon chambers in the high-background regions of the detector with increasing LHC luminosity. The…
We present a readout chip prototype for future pixel detectors with timing capabilities. The prototype is intended for characterizing 4D pixel arrays with a pixel size of $100\times100~\mu \text{m}^2$, where the sensors are Low Gain…
The International Large Detector (ILD) --a detector concept for the International Linear Collider (ILC)-- foresees a Time Projection Chamber (TPC) as its main tracking detector. Currently, the R&D efforts for such a TPC focus on studies…
For the International Large Detector (ILD), foreseen to be built at the International Linear Collider (ILC), a Time Projection Chamber (TPC) is intended to be used as the main tracking detector. The amplification will be provided by Micro…
The 3D silicon sensor has demonstrated excellent performances (signal collection, detection efficiency, power consumption, etc.) comparable or even better with respect to the traditional planar sensor of the ATLAS Detector at the Large…
DaRveX stands for "Decay at Rest $\nu_e$-Pb cross (X) section measurement". So far, there has not been good target to detect low energy $\nu_e$. Lead is expected to be an excellent $\nu_e$ target because the cross section is expected to be…
An AC susceptometer operating in the range of 10 Hz to 100 kHz and at room temperature is designed, built, calibrated and used to characterize the magnetic behaviour of coated magnetic nanoparticles. Other weakly magnetic materials (in…
The electromagnetic barrel calorimeter is one of the main components of the planned GlueX experiment. It will consist of 48 modules made of consecutive layers of 4 m long lead sheet and fast green scintillator fibers for an overall number…
This contribution presents a pragmatic approach to read-out electronics for drift chambers used in particle physics experiments, specifically for the R3B experiment at GSI. The design uses discrete miniature SMD components and LVDS inputs…
We present a mathematical method for identifying, separating and quantifying the 3D significant distortions. Measurement of a gas quenched C-ring type sample is performed by a Coordinate Measuring Machine (CMM). Quenching simulation is done…
The physics aims at the proposed future high-energy linear $e^+e^-$ collider CLIC pose challenging demands on the performance of the detector system. In particular, the vertex and tracking detectors have to combine a spatial resolution of a…
Gas Electron Multipliers (GEM) are an interesting technology under consideration for the future upgrade of the forward region of the CMS muon system, specifically in the $1.6<| \eta |<2.4$ endcap region. With a sufficiently fine…
A muon collider would open new frontiers of investigation in high energy particle physics, allowing precision measurements to be made at the TeV energy frontier. One of the greatest challenges to constructing a muon collider is the…
The first FCC-ee final focus quadrupole prototype has been designed, manufactured, assembled and tested at warm. The prototype is a single aperture quadrupole magnet of the CCT type. One edge of the magnet was designed with local multipole…
Since the summer of 2003, a large Micromegas TPC prototype (1000 channels, 50 cm drift, 50 cm diameter) has been operated in a 2T superconducting magnet at Saclay. A description of this apparatus and first results from cosmic ray tests are…
Analog multiplexing appears to be a promising solution for modern transmitters, where speed is the primary limitation. The objective is the development of a low-cost solution to compare different digital to analog (DAC) schemes. In…
The Electron-Ion Collider in China (EicC) has been proposed to study the inner structure of matter and fundamental laws of strong interactions. In this paper, we will present a conceptual design of the tracking system based on the…