Related papers: Reduction of high reset currents in unipolar resis…
The high reset current IR in unipolar resistance switching now poses major obstacles to practical applications in memory devices. In particular, the first IR-value after the forming process is so high that the capacitors sometimes do not…
In unipolar resistance switching of NiO capacitors, Joule heating in the conducting channels should cause a strong nonlinearity in the low resistance state current-voltage (I-V) curves. Due to the percolating nature of the conducting…
We demonstrate single dopant implantation into the channel of a silicon nanoscale metal-oxide-semiconductor field-effect-transistor. This is achieved by monitoring the drain current modulation during ion irradiation. Deterministic doping is…
Both analog and digital resistive switching are essential components in the neuromorphic computing system. This work reports the influence of Cu ions for the transformation of analog to digital resistive switching in ITO/NiO/Ag memristor…
We investigated the 1/f noise of Pt/NiO/Pt capacitors that show unipolar resistance switching. When they were switched from the low to high resistance states, the power spectral density of the voltage fluctuation was increased by…
Identifying quantum critical points (QCPs) and their associated fluctuations may hold the key to unraveling the unusual electronic phenomena observed in cuprate superconductors. Recently, signatures of quantum fluctuations associated with…
Electrostatic doping into an $n$-type Mott insulator Sm$_{2}$CuO$_{4}$ has been successfully achieved with use of the heterojunction with an $n$-type band semiconductor Nb-doped SrTiO$_{3}$. The junction exhibits rectifying current-voltage…
The spectral properties of a one-dimensional (1D) single-chain Mott insulator Sr$_2$CuO$_{3}$ have been studied in angle-resolved photoemission and optical spectroscopy, at half filling and with small concentrations of extra charge doped…
Understanding the doping evolution from a Mott insulator to a superconductor probably holds the key for resolving the mystery of unconventional superconductivity in copper oxides. To elucidate the evolution of the electronic state starting…
We fabricated Pt/NiO/Pt capacitor structures with various bottom electrode thicknesses, $t_{BE}$, and investigated their resistance switching behaviors. The capacitors with $t_{BE} \geq 50$ nm exhibited typical unipolar resistance memory…
Doping is an effective way to tune the property of metal oxides1-5, for achieving functional oxide electronics6-8. Previously we developed a controllable hydrogen doping technology at ambient conditions by use of electron-proton synergistic…
The depinning current Ic versus applied magnetic field B close to the transition temperature Tc of Nb thin films with randomly diluted triangular arrays of antidots is investigated. % Our experiments confirm essential features in Ic(B) as…
A central issue for copper oxides is the nature of the insulating ground state at low carrier densities and the emergence of high-temperature superconductivity from that state with doping. Even though this superconductor-insulator…
Metal-insulator transitions (MITs) in correlated oxides offer immense potential for next-generation Mottronic devices. However, their integration into practical applications is often hindered by the coupling of MITs with symmetry-lowering…
We report X-ray irradiation-induced carrier doping effects on the electrical conductivity in the organic dimer-Mott insulators $\kappa$-(ET)$_{2}$$X$ with $X =$ Cu[N(CN)$_{2}$]Cl and Cu$_{2}$(CN)$_{3}$. For…
Resistive switching devices, important for emerging memory and neuromorphic applications, face significant challenges related to control of delicate filamentary states in the oxide material. As a device switches, its rapid conductivity…
An analytical solution to the problem of decreasing the energy losses $\Omega$ in diode current interrupters during recovery of the blocking ability by optimizing dopant distribution $N(x)$ over structure thickness has been obtained. It was…
1T1R (1-transistor-1-resistor) memory crossbar arrays represent a promising solution for compute-in-memory matrix-vector multiplication accelerators and embedded or storage-class memory. However, the size and scaling of these arrays are…
BiFeO3 thin films are deposited on FTO coated glass substrates using a simple sol-gel deposition technique, limiting thickness about 70 nm and Ag/BiFeO3/FTO RRAM devices are prepared. The devices showed low-voltage bipolar switching with…
We use scanning tunneling microscopy to investigate the doping dependence of quasiparticle interference (QPI) in NaFe1-xCoxAs iron-based superconductors. The goal is to study the relation between nematic fluctuations and Cooper pairing. In…