Related papers: High Precision HalfWave Rectifier Circuit In Dual …

We developed a waveguide-type dual-polarization sideband-separating SIS receiver system of the 100-GHz band for the 45-m radio telescope at the Nobeyama Radio Observatory, Japan. This receiver is composed of an ortho-mode transducer and two…

Digital light projector systems are crucial components in applications including computational imaging, fluorescence microscopy and highly parallel data communications. Here we present a chip-scale projector system based on emissive…

We report the hyperfine splitting (HFS) measurement of cesium (Cs) 7S1/2 state by optical-optical double-resonance spectroscopy in the 6S1/2-6P3/2-7S1/2 (852 nm + 1470 nm) ladder-type system. The HFS frequency calibration is performed by…

We describe an approach to the high-fidelity measurement of a superconducting qubit using an on-chip microwave photon counter. The protocol relies on the transient response of a dispersively coupled measurement resonator to map the state of…

In the context of the Galactic Emission Mapping, a new receiver at 5GHz was developed to characterize the galactic foreground to the Cosmic Microwave Background Radiation. This is a 5GHz super heterodyne polarimeter with double down…

In this paper, we combine the design of band-pass frequency selective surfaces (FSSs) with polarization converters to realize a broadband frequency-selective polarization converter (FSPC) with lowbackward scattering, which consists of the…

Cavity combiners have been put forward for high power combining due to their advantages of larger combining ability, variable input channels and less power loss. For a high power cavity combiner, it is better to keep the power loss ratio in…

Using memristive properties common for the titanium dioxide thin film devices, we designed a simple write algorithm to tune device conductance at a specific bias point to 1% relative accuracy (which is roughly equivalent to 7-bit precision)…

The integrated optical circuit is a promising architecture for the realization of complex quantum optical states and information networks. One element that is required for many of these applications is a high-efficiency photon detector…

The radiation hardness of passive CMOS pixel sensors fabricated in 150 nm LFoundry technology is investigated. CMOS process lines are especially of interest for large-scale silicon detectors as they offer high production throughput at…

Second harmonic conversion from 1550~nm to 775~nm with an efficiency of 400% W$^{-1}$ is demonstrated in a gallium phosphide (GaP) on oxide integrated photonic platform. The platform consists of doubly-resonant, phase-matched ring…

Due to the sensitivity of the piezoelectric layer in surface acoustic wave (SAW) resonators to temperature, a method of achieving device stability as a function of temperature is required. This work presents the design, modeling and…

We fabricate and characterize a radio-frequency semiconductor point-contact electrometer (RF-PC) analogous to radio-frequency single-electron transistors [RF-SETs, see Science {\bf 280}, 1238 (1998)]. The point contact is formed by surface…

We present improved performance for a 92 to 96 GHz cross-spectrum phase modulated (PM) noise measurement system reported. The system is principally designed to measure amplifiers in pulsed mode as well as in CW mode at a given pulse…

We report on a compact, highly sensitive all-fiber accelerometer suitable for low frequency and low amplitude vibration sensing. The sensing elements in the device are two short segments of strongly coupled asymmetric multicore fiber (MCF)…

In this paper, we realize the transmitter of high frequency (HF) bidirectional transceiver radio. A bidirectional transceiver (Bitx) consists of a transmitter and receiver, in which some common circuits are used together by the transmitter…

This paper describes a 8 bits, 20 Msamples/s pipeline analog-to-digital converter implemented in 0.6 \mu m CMOS technology with a total power dissipation of 75.47 mW. Circuit techniques used include a precise comparator, operational…

We demonstrate a free-space amplitude modulator for mid-infrared radiation (lambda=9.6 um) that operates at room temperature up to at least 20 GHz (above the -3dB cutoff frequency measured at 8.2 GHz). The device relies on the ultra-fast…

The circuit presented in this paper aims at providing three 40 Vpp 50Hz AC voltages sources with 120-degree phase separation between them. This is a fully analogue circuit that uses standard, low-cost electronic components without resorting…

Very small electromechanical coupling coefficient in micro-electromechanical systems (MEMS) or acoustic resonators is quite of a concern for oscillator performance, specially at mmWave frequencies. This small coefficient is the…