Related papers: Current Status of Graphene Transistors

A spin field effect transistor (FET) is proposed by utilizing a graphene nanoribbon as the channel. Similar to the conventional spin FETs, the device involves ferromagnetic metals as a source and drain; they, in turn, are connected to the…

The development of flexible electronics operating at radio-frequencies (RF) requires materials that combine excellent electronic performance and the ability to withstand high levels of strain. In this work, we fabricate graphene…

Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show…

Graphene is of interest in the development of next-generation electronics due to its high electron mobility, flexibility and stability. However, graphene transistors have poor on/off current ratios because of the absence of a bandgap. One…

Graphene is generally considered to be a strong candidate to succeed silicon as an electronic material. However, to date, it actually has not yet demonstrated capabilities that exceed standard semiconducting materials. Currently…

Graphene field effect transistors (G-FETs) have appeared as suitable candidates for sensing charges and have thus attracted large interest for ion and chemical detections. In particular, their high sensitivity, chemical robustness,…

We report the batch fabrication of graphene field-effect-transistors (GFETs) with nanoperforated graphene as channel. The transistors were cut and encapsulated. The encapsulated GFETs display saturation regions that can be tuned by…

In this work, we report on the electronic properties of solution-gated field effect transistors (SGFETs) fabricated using large-area graphene. Devices prepared both with epitaxially grown graphene on SiC as well as with chemical vapor…

Graphene nanoribbon (GNR) emerges as an exceptionally promising channel candidate due to its tunable sizable bandgap (0-3 eV), ultrahigh carrier mobility (up to 4600 cm^(2) V^(-1) s^(-1)), and excellent device performance (current on-off…

Graphene field-effect transistors are fabricated utilizing single-crystal hexagonal boron nitride (h-BN), an insulating isomorph of graphene, as the gate dielectric. The devices exhibit mobility values exceeding 10,000 cm2/V-sec and current…

This paper reviews the experimental and theoretical state of the art in ballistic hot electron transistors that utilize two-dimensional base contacts made from graphene, i.e. graphene base transistors (GBTs). Early performance predictions…

We present an atomistic three-dimensional simulation of graphene nanoribbon field effect transistors (GNR-FETs), based on the self-consistent solution of the 3D Poisson and Schroedinger equation with open boundary conditions within the…

A fresh look on carbon-based transistor channel materials like single-walled carbon nanotubes (CNT) and graphene nanoribbons (GNR) in future electronic applications is given. Although theoretical predictions initially promised that GNR…

Recently developed processes have enabled bottom-up chemical synthesis of graphene nanoribbons (GNRs) with precise atomic structure. These GNRs are ideal candidates for electronic devices because of their uniformity, extremely narrow width…

Graphene has attracted much attention as one of promising candidates of future high-speed transistor materials because of its high carrier mobility of more than 10,000 cm2 V-1 s-1. Up to this point, we have focused on the contact properties…

We present a compact physics-based model of the current-voltage characteristics of graphene field-effect transistors, of especial interest for analog and radio-frequency applications where bandgap engineering of graphene could be not…

The superior intrinsic properties of graphene have been a key research focus for the past few years. However, external components, such as metallic contacts, serve not only as essential probing elements, but also give rise to an effective…

A graphene field-effect-transistor (GFET) model calibrated with extracted device parameters and a commercial 65 nm silicon MOSFET model are compared with respect to their radio frequency behavior. GFETs slightly lag behind CMOS in terms of…

We present a circuit-compatible compact model of the intrinsic capacitances of graphene field-effect transistors (GFETs). Together with a compact drain current model, a large-signal model of GFETs is developed combining both models as a…

Bilayer graphene is a promising material for radio-frequency transistors because its energy gap might result in a better current saturation than the monolayer graphene. Because the great deal of interest in this technology, especially for…