Related papers: An LED-based Flasher System for VERITAS
VERITAS is an array of four identical telescopes designed for detecting and measuring astrophysical gamma rays with energies in excess of 100 GeV. Each telescope uses a 12 m diameter reflector to collect Cherenkov light from air showers…
The 499 pixel photomultiplier cameras of the VERITAS gamma ray telescopes are instrumented with 500MHz sampling Flash ADCs. This paper describes a preliminary investigation of the best methods by which to exploit this information so as to…
A LED flasher has been developed for TUNKA-133 EAS Cherenkov detector. A blue ultra bright InGaN LED is used as a light source in the flasher. The flasher's driver is based on a fast discharge of a small capacitor via a complementary pair…
The Very Energetic Radiation Imaging Telescope Array System (VERITAS) represents an important step forward in the study of extreme astrophysical processes in the universe. It combines the power of the atmospheric Cherenkov imaging technique…
A light-emitting diode (LED) pulser for testing the low-rate response of a photomultiplier tube (PMT) to scintillator-like pulses has been designed, developed, and implemented. This pulser is intended to simulate 80 ns full width at half…
We have developed a sensor system based on an optical photon-counting imager with high timing resolution, aiming for highly time-variable astronomical phenomena. The detector is a monolithic Geiger-mode avalanche photodiode array customized…
VERITAS is a new atmospheric Cherenkov imaging telescope array to detect very high energy gamma rays above 100 GeV. The array is located in southern Arizona, USA, at an altitude of 1268m above sea level. The array consists of four 12-m…
VERITAS (the Very Energetic Radiation Imaging Telescope Array System) is the next generation ground-based gamma-ray observatory that is being built in southern Arizona by a collaboration of ten institutions in Canada, Ireland, the U.K. and…
A system based on commercially available items, such as a laser diode, emitting in the visible range $\sim 400$ nm,and multimode fiber patches, fused fiber splitters and optical switches may be assembled,for time calibration of…
A Central Laser Facility is a system often used in astroparticle experiments based on arrays of fluorescence or Cherenkov light detectors. The instrument is based on a laser source positioned at a certain distance from the array, emitting…
VERITAS is an array of four 12-m imaging Cherenkov telescopes, sensitive to gamma rays in the energy range from 85 GeV to 30 TeV. VERITAS dedicates roughly 40% of its total observing time to blazars. We present recent highlights from the…
Gaze tracking is an essential component of next generation displays for virtual reality and augmented reality applications. Traditional camera-based gaze trackers used in next generation displays are known to be lacking in one or multiple…
We demonstrate a blind zone-suppressed and flash-emitting solid-state Lidar based on lens-assisted beam steering (LABS) technology. As a proof-of-concept demonstration, with a design of subwavelength-gap one-dimensional (1D) long-emitter…
The VERITAS gamma-ray observatory, situated in southern Arizona, is an array of four 12m diameter imaging Cherenkov telescopes, each with a 499-pixel photomultiplier-tube camera. The instrument is designed to detect astrophysical gamma rays…
VERITAS, the Very Energetic Radiation Imaging Telescope Array System, is an array of four 12 m diameter imaging atmospheric Cherenkov telescopes for gamma-ray astronomy above 100 GeV currently in operation in Arizona. The VERITAS…
During moonlit nights, observations with ground-based Cherenkov telescopes at very high energies (VHE, $E>100$ GeV) are constrained since the photomultiplier tubes (PMTs) in the telescope camera are extremely sensitive to the background…
VERITAS is an array of imaging atmospheric Cherenkov telescopes sensitive to gamma rays in the energy range between 85 GeV and 30 TeV. The instrument underwent an upgrade of the camera triggers in November 2011. The new systems use 400 MHz…
A stable reference light source based on an LED (Light Emission Diode) is presented for stabilizing the conversion gain of the opto-electronic system of a gamma- and fast-neutron radiographic and tomographic imaging device. A constant…
A highly stable monitoring system based on blue and red light emitting diodes coupled to a distribution network comprised of optical fibers has been developed for an electromagnetic calorimeter that uses lead tungstate crystals readout with…
We describe here a proposal for a light injection calibration system for the MINOS detectors based on ultra bright blue LEDs as the light source. We have shown that these LEDs are bright enough to span over two orders of magnitude in light…