Related papers: Turbulent flow over a house in a simulated hurrica…
A light breeze rising over calm water initiates an intricate chain of events that culminates in a centimeters-deep turbulent shear layer capped by gravity-capillary ripples. At first, viscous stress accelerates a laminar wind-drift layer…
Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can…
Buoyancy effects and nozzle geometry can have a significant impact on turbulent jet dispersion. This work was motivated by applications involving hydrogen. Using helium as an experimental proxy, buoyant horizontal jets issuing from a round…
Large Eddy Simulations of a flow at a moderate Reynolds number over and around a three-dimensional hill have been performed. The main aim of the simulations was to study the effects of various inflow conditions (boundary layer thickness and…
A pair of Direct Numerical Simulations is used to investigate curvature and pressure effects. One has a Gaussian test bump and a straight opposite wall, while the other has a straight test wall and a blowing/suction distribution on an…
The atmospheric convective boundary layer (CBL) consists of three basic parts: (i) the surface layer unstably stratified and dominated by small-scale turbulence of very complex nature; (ii) the CBL core dominated by the energy-, momentum-…
The present work discusses about a possible physical interpretation of the occurrence of turbulence in a dynamic fluid with mathematical modeling and computer simulation. Here turbulence is defined to be a phenomenon of random velocity…
In this paper, we present the results of a numerical study of air-water turbulent bubbly flow in a periodic vertical square duct. The study is conducted using a novel numerical technique which leverages Volume of Fluid method for interface…
Transition to turbulence dramatically alters the properties of fluid flows. In most canonical shear flows, the laminar flow is linearly stable and a finite-amplitude perturbation is necessary to trigger transition. Controlling transition to…
Many traditional methods for wind turbine design and analysis assume quasi-steady aerodynamics, but atmospheric flows are inherently unsteady and modern turbine blades are susceptible to aeroelastic deformations. This study therefore…
In the study of ocean wave impact on structures, one often uses Froude scaling since the dominant force is gravity. However the presence of trapped or entrained air in the water can significantly modify wave impacts. When air is entrained…
Boundary layer turbulence, particularly the vertical fluxes of momentum, shapes the evolution of winds and currents and plays a critical role in weather, climate, and biogeochemical processes. In this work, a unified, data-driven…
Transpiration cooling is an active thermal protection system of increasing interest in aerospace applications wherein a coolant is effused through a porous wall into a hot external flow. The present work focuses on the interaction between…
Colliding flows are a commonly used scenario for the formation of molecular clouds in numerical simulations. Due to the thermal instability of the warm neutral medium, turbulence is produced by cooling. We carry out a two-dimensional…
The flow of the laminar boundary layer on a flat plate is studied with simulation of Navier-Stokes equations. The mechanisms of flow instability at external edge of the boundary layer and near the wall are analyzed using the energy gradient…
Turbulent Rayleigh-Benard convection with phase changes in an extended layer between two parallel impermeable planes is studied by means of three-dimensional direct numerical simulations for Rayleigh numbers between 10^4 and 1.5\times 10^7…
Turbulence intensity profiles are compared for smooth- and rough-wall pipe flow measurements made in the Princeton Superpipe. The profile development in the transition from hydraulically smooth to fully rough flow displays a propagating…
The drag reduction induced by superhydrophobic surfaces is investigated in turbulent pipe flow. Wetted superhydrophobic surfaces are shown to trap gas bubbles in their asperities. This stops the liquid from coming in direct contact with the…
A recent work of Harikrishnan et al. [arXiv:2110.02253 (2021)] has revealed an abundance of hairpin-like vortex structures, oriented in a similar direction, in the turbulent patches of a stably stratified Ekman flow. The Ekman flow over a…
In many environmental flows, an air-water free surface interacts with a turbulent flow in the water phase. To mimic this situation, we propose an original experimental setup, based on the Randomly Actuated Synthetic Jet Array (RASJA)…