Related papers: Technique for the Dry Transfer of Epitaxial Graphe…
Multilayer graphene (MLG) thin films are deposited on silicon oxide substrates by mechanical exfoliation (or 'scotch-tape method') from Kish graphite. The thickness and number of layers are determined from both Atomic Force Microscopy (AFM)…
We demonstrate a fabrication scheme for clean suspended structures using chemical-vapor-deposition-grown graphene and a dry transfer method on lift-off-resist-coated substrates to facilitate suspended graphene nanoelectronic devices for…
Combining scanning tunneling microscopy and angle-resolved photoemission spectroscopy, we demonstrate how to tune the doping of epitaxial graphene from p to n by exploiting the structural changes that occur spontaneously on the Ge surface…
Graphene is a promising candidate for future electronic applications. Manufacturing graphene-based electronic devices typically requires graphene transfer from its growth substrate to another desired substrate. This key step for device…
Graphene is an ideal material for optoelectronic applications. Its photonic properties give several advantages and complementarities over Si photonics. For example, graphene enables both electro-absorption and electro-refraction modulation…
Tuning the charge carrier density of two-dimensional (2D) materials by incorporating dopants into the crystal lattice is a challenging task. An attractive alternative is the surface transfer doping by adsorption of molecules on 2D crystals,…
Establishing good electrical contacts to nanoscale devices is a major issue for modern technology and contacting 2D materials is no exception to the rule. One-dimensional edge-contacts to graphene were recently shown to outperform surface…
Owing to their unprecedented electronic properties, graphene and two-dimensional (2D) crystals have brought fresh opportunities for advances in planar spintronic devices. Graphene is an ideal medium for spin transport while also being an…
Graphene has many advantageous properties, but its lack of an electronic band gap makes this two dimensional material impractical for many nanoelectronic applications, for example field effect transistors. This problem can be circumvented…
We studied the magneto-transport properties of graphene prepared by exfoliation on a III V semiconductor substrate. Tuneability of the carrier density of graphene was achieved by using a doped GaAs substrate as a back-gate. A GaAs/AlAs…
The deposition of atomically thin highly uniform chemically derived graphene (CDG) films on 300 mm SiO2/Si wafers is reported. We demonstrate that the very thin films can be lifted off to form uniform membranes than can be free-standing or…
The key to achieve high-quality van der Waals heterostructure devices made of stacking various two-dimensional (2D) layered materials lies in the clean interface without bubbles and wrinkles. Although polymethylmethacrylate (PMMA) is…
Conventional field effect transistor operation in graphene is limited by its zero gap and minimum quantum conductivity. In this work, we report on controlled electrochemical modification of graphene such that its conductance changes by more…
A simple method for the creation of Ohmic contact to 2-D electron gas (2DEG) in AlGaN/GaN high electron-mobility transistors (HEMTs) using Cr/Graphene layer is demonstrated. A weak temperature dependence of this Ohmic contact observed in…
A clean, flat and orientation-identified graphene on a substrate is in high demand for graphene electronics. In this study, the hetero-epitaxial graphene growth on Cu(111)/mica(001) by chemical vapor deposition is investigated to check the…
Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated transmission electron microscopy (TEM) samples, either in retaining protein concentration, providing mechanical stability or dissipating sample…
Remote and van der Waals epitaxy are promising approaches for synthesizing single crystalline membranes for flexible electronics and discovery of new properties via extreme strain; however, a fundamental challenge is that most materials do…
Recently, a contamination-free dry transfer method for graphene grown by chemical vapor deposition (CVD) has been reported that allows to directly pick-up graphene from the copper growth substrate using a flake of hexagonal boron nitride…
The epitaxial growth of functional materials using a substrate with a graphene layer is a highly desirable method for improving structural quality and obtaining free-standing epitaxial nano-membranes for scientific study, applications, and…
A new large-area wet transfer method to transfer graphene directly onto UHMWPE membranes without organic-coating, thermal treatment or other mediated substrate was developed. This method completely avoids the problems of PMMA-residue and…